15X5M Elbow,15X5M Pipe fittings seamless,Elbow,Tee,Reducer
We are a professional pipe fittings & flange manufacturer.
15X5M elbow is a russian standard material used for petroleum processing and the petrochemical industry
| Grade : | 15Kh5M ( 15Х5М ) ( Х5М ) |
| Classification : | Low alloy high-temperature steel |
Chemical composition in % for grade 15Kh5M ( 15Х5М )
| C | Si | Mn | Ni | S | P | Cr | Mo | W | V | Ti | Cu |
| max 0.15 | max 0.5 | max 0.5 | max 0.6 | max 0.025 | max 0.03 | 4.5 – 6 | 0.45 – 0.6 | max 0.3 | max 0.05 | max 0.03 | max 0.2 |
Temperature of critical points for grade 15Kh5M ( 15Х5М ).
| Ac1 = 815 , Ac3(Acm) = 848 , Ar3(Arcm) = 775 , Ar1 = 718 |
Mechanical properties under Т=20oС for grade 15Kh5M ( 15Х5М )
| Assortment | Dimension | Direct. | sв | sT | d5 | y | KCU | Heat treatment |
| – | mm | – | MPa | MPa | % | % | kJ / m2 | – |
| Pipe hot strain, GOST 550-75 | 392 | 216 | 22 | 50 | 1180 | |||
| Bar, GOST 20072-74 | Ø 90 | 390 | 215 | 22 | 50 | 1180 | Annealing 840 – 860oC,Cooling oven, | |
| Sheet trick, GOST 7350-77 | 470 | 235 | 18 | Annealing 840 – 870oC,Cooling air, |
| Brinell hardness for 15Kh5M ( 15Х5М ) (hot-rolled, annealing) , GOST 20072-74 | HB 10 -1 = 217 MPa |
| Brinell hardness for 15Kh5M ( 15Х5М ) , Pipe GOST 550-75 | HB 10 -1 = 170 MPa |
Equivalent steels for grade 15Kh5M ( 15Х5М )
| USA | Germany | Japan | France | European | Italy | China | Hungary | Poland | Romania | Czechia | |||||||||||||||||||||||||||||
| – | DIN,WNr | JIS | AFNOR | EN | UNI | GB | MSZ | PN | STAS | CSN | |||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
Chrome Moly A234 WP5 End Pipe Cap Exporter, Alloy Steel A234 WP5 Welded Pipe Fittings, Alloy Steel WP5 Equal Tee, ASME B16.28, MSS SP-43 Alloy Steel WP5 Reducer, WP5 Alloy Steel Pipe Fittings, Alloy Steel 5Cr-1/2Mo Pipe Fittings, A234 WP5 Long / Short Radius Elbow
| Grade Specifications | Chrome Moly Grades P1, P5, P9, P11, P22, P91 |
| Specification | ASTM/ ASME A/SA234 WP1, WP5, WP9, WP11, WP22, WP91 |
| Type | Seamless / Welded / |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom |
| Range | ½” NB to 48″ NB in Sch 10s, 40s, 80s, 160s, XXS. |
| Dimensions | ANSI/ASME B16.9, B16.28, MSS-SP-43. |
| Applicable Standards | 1-ASME B 16.9 for large Bore 2-ASME B 16.11 for small Bore (socket welded) 3-ASME B 16.25 for butt weld ends |
| Grade | C | Mn | Si | S | P | Cr | Mo |
|---|---|---|---|---|---|---|---|
| A234 WP5 | ≤0.15 | ≤0.6 | ≤0.5 | ≤0.04 | ≤0.03 | 4-6 | 0.44-0.65 |
| Grade | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation % |
|---|---|---|---|
| A234 WP5 | 415 – 585 | ≥205 | ≥20 |
SIZES:
1/2″ N. B. TO 24″ N. B. Seamless Pipe Fittings(BW)
1/2″ N. B. TO 72″ N. B. Welded BW
Marking:Standard/ As per request
Packing: Wooden case(Fumigation free) Or as per request
Inspection: In house and third party
Document: MTC EN10204-3.1 can be provided prior to shipment
Elbow 180Deg 140×8 R127, Steel 15×5
