Aluminum Alloy Flanges

We are one of the most quality conscious producers of the wide range of Aluminum alloy flange which is meant to cater to various industrial platforms in various domains. The applications of this product can be traced to numerous industrial domains which is highly convenient for our clients.

The Aluminum materials used to manufacture and fabricate these highly in- demand products are known to be acquired experienced industrial distributors dealing in these products for a fairly long period of time. We study and analyze behavioral patterns and the quality levels of the vendors providing raw materials which helps to choose the best resources to be used in the manufacturing process. The technological superiority of our manufacturing product enables us to deliver our clients with prompt and flawless service.

Apart the latest technology, we also ensure high levels of tensile and ductile strength which is highly beneficial. Our experts monitor and make sure that these products are tested for its hardness and dimensional accuracy. This product does not cater to rust and plays an important role in resisting all kinds of industrial obstacles. The prices that we offer this product is the least one can expect and the quality aspect of it is simply exquisite which speak volumes of the total dimensional accuracy of the product.

Flange Standards:
ANSI/ASME Standard: ANSI B16.5,  MSS-SP-44,

Type	slip on flange, Weld Neck Flange ，Threaded Flange Blind Flange,  Orifice Flange socket weld flange, Spacer Ring, Paddle, Spectacle Blind Flange

THE FOLLOWING ALLOYS ARE AVAILABLE

ALUM 1100 A91100 B/SB 247, B/SB 361 B/SB 211, B/SB 221
* ALUM 3003 A93003 B/SB 247, B/SB 361 B/SB 211, B/SB 221
* ALUM 5083 A95083 B/SB 247, B/SB 361 B/SB 221
* ALUM 5086 A95086 NONE B/SB 221
* ALUM 6061 A96061 B/SB 247,B/SB 361, QQ-A-367,
AMS4127/4146 B/SB 211,
B/SB 221

We are a professional Aluminum alloy flanges manufacturer，

Standard size ：DN40，DN50，DN65，DN80，DN100，DN125，DN150，DN200，DN300

ALUMINUM 3003 Flanges  ,3003 aluminium alloy Flange

Alumimum 5083 Flanges， 5083  aluminium alloy Flange

ALUMINUM 5086 Flanges，5086 aluminium alloy Flange

3003 aluminium alloy is an alloy in the wrought aluminium-manganese family (3000 or 3xxx series). It can be cold worked (but not, unlike some other types of aluminium alloys, heat-treated) to produce tempers with a higher strength but a lower ductility. Like most other aluminium-manganese alloys, 3003 is a general-purpose alloy with moderate strength, good workability, and good corrosion resistance. It is commonly rolled and extruded, but typically not forged. As a wrought alloy, it is not used in casting. It is also commonly used in sheet metal applications such as gutters, downspouts, roofing, and siding.

The alloy composition of 3003 aluminium as below

• Aluminium: 96.8 to 99%
• Copper: 0.05 to 0.20%
• Iron: 0.70% max
• Manganese: 1.0 to 1.5%
• Silicon: 0.6% max
• Zinc: 0.1% max
• Residuals: 0.15% max

6061 aluminium alloy Flanges

6061 is a precipitation-hardened aluminum alloy, containing magnesium and silicon as its major alloying elements. It has good mechanical properties, exhibits good weldability, and is very commonly extruded (second in popularity only to 6063). It is one of the most common alloys of aluminum for general-purpose use.

It is commonly available in pre-tempered grades such as 6061-O (annealed), tempered grades such as 6061-T6 (solutionized and artificially aged) and 6061-T651 (solutionized, stress-relieved stretched and artificially aged).

Component    Wt. % Al 95.8 – 98.6 Cr 0.04 – 0.35 Cu 0.15 – 0.4 Fe Max 0.7

Component    Wt. % Mg 0.8 – 1.2 Mn Max 0.15 Other, each Max 0.05 Other, total Max 0.15

Component    Wt. % Si 0.4 – 0.8 Ti Max 0.15 Zn Max 0.25

Applications:

Oxygen Making Equipment
Air Separation Equipment
Deep Cooling Equipment
Chemical equipment
HEAT exchanger, cooler, carburetor, intercooler, etc. Other equipment