Aluminum 6061 T6 Weld neck Flange,ASTM B247 6061 T6 Weld neck Flanges
We are a professional manufacturer of Aluminum 6061 T6 Weld neck Flange ASME B16.5 ASTM B247 6061 T6 Weld neck Flanges
6061 is a precipitation-hardened aluminum alloy, containing magnesium and silicon as its major alloying elements. It has good mechanical properties, exhibits good weldability, and is very commonly extruded (second in popularity only to 6063). It is one of the most common alloys of aluminum for general-purpose use.
It is commonly available in pre-tempered grades such as 6061-O (annealed), tempered grades such as 6061-T6 (solutionized and artificially aged) and 6061-T651 (solutionized, stress-relieved stretched and artificially aged).
ALUMINIUM ALLOY 6061 FLANGE INTERNATIONAL STANDARDS
| UNS | EN | DIN | ISO | BS (OLD) | USA | WNR |
| A96061 | AW-AlMg1SiCu EN AW-6061 |
AlMgSiCu | AlMg1SiCu | HE20 | AA6061 | 3.3211 |
ALUMINIUM 6061 FLANGES CHEMICAL COMPOSITION
| Mn | Si | Cr | Cu | Fe | Zn | Al | Mg | Ti | Other Each/Total |
| 0.15 | 0.4-0.8 | 0.15-0.35 | 0.15-0.4 | 0.7 | 0.25 | Remainder | 0.8-1.2 | 0.15 | 0.005/0.15 |
ALUMINUM 6061 FLANGES MECHANICAL PROPERTIES
| Tensile Strengtd (PSI) | Yield Strengtd (PSI) | Shear Strengtd (PSI) | Elongation in 2″ | Brinell Hardness |
| 45,000 | 40,000 | 31,000 | 12 | 95 |
Oxygen Making Equipment
Air Separation Equipment
Deep Cooling Equipment
Chemical equipment
HEAT exchanger, cooler, carburetor, intercooler, etc. Other equipment
ASTM B247-20
Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
This specification covers aluminum and aluminum-alloy die forgings, hand forgings, and rolled ring forgings and includes the following UNS alloy designations: A91100, A92014, A92018, A92025, A92219, A92618, A93003, A94032, A95083, A96061, A96066, A96151, A97049, A97050, A97075, A97076, and A97175. Tempers covered by this specification includes: H112, T4, T6, T61, T73, T74, T7352, T7452, T7454, T652, T852, and H111 as well as F and 01 types. The forgings may be manufactured by pressing, hammering, or rolling, at the option of the producer. Requirements for quality assurance, chemical analysis, tension and hardness tests, heat treatment, heat-treat response, and stress corrosion resistance and stress-corrosion cracking test are detailed. The forgings shall conform to the chemical composition requirements prescribed for aluminum, silicon, iron, copper, manganese, magnesium, chromium, nickel, zinc, zirconium, and titanium. Forgings having the specified thickness shall meet the requirements specified for the mechanical properties such as tensile strength, yield strength, elongation, and Brinell hardness.
How to order our Aluminum forged ASTM B247 6061 T6 Weld neck Flanges?
2 PIECES OF WELDING NECK FLANGE DIM. 6” (168,3mm) ASME B16.5 CLASS 300# RAISED FACE SCH.80 (10,97mm Thk.) MATERIAL ALUMINIUM ASTM B247 6061 T6
