C&N is a professional manufacturer of BS EN10241 Steel threaded pipe fittings
EN 10241 (BS1740) galvanised pipe fittings,EN 10241 STEEL PIPE SOCKETS / STEEL PIPE COUPLINGS
Specification
| Nominal size | O.D. | Length | O.D. | Leng th |
| DN | A mm |
B mm |
C mm |
D mm |
| 6 | 15.0 | 17 | 15.0 | 8 |
| 8 | 18.5 | 25 | 18.5 | 11 |
| 10 | 21.3 | 26 | 21.3 | 12 |
| 15 | 26.6 | 34 | 26.6 | 15 |
| 20 | 31.8 | 36 | 31.8 | 17 |
| 25 | 39.5 | 43 | 39.5 | 20 |
| 32 | 48.3 | 48 | 48.3 | 22 |
| 40 | 54.5 | 48 | 54.5 | 22 |
| 50 | 66.2 | 56 | 68.0 | 26 |
| 65 | 82.0 | 65 | 84.2 | 30 |
| 80 | 95.0 | 71 | 98.4 | 34 |
| 100 | 121.4 | 83 | 124.0 | 40 |
| 125 | 146.3 | 92 | 149.0 | 44 |
| 150 | 173.3 | 92 | 177.0 | 44 |
Steel Pipe Sockets Conforms to DIN 2986,EN10241
Material: Seamless steel pipe
Thread: DIN2999,ISO7/1,BS21
Finish: Black or Galvanized
Material
- Machined Fittings: These are manufactured to dimensions in BS EN 10241:2000 and generally made from “Free Cutting Steel”.
Finish
Surface Condition
- Black Steel: These fittings are generally degreased and protected with a coating of light oil.
- Zinc Protective Coating: Fittings may be supplied zinc plated using the Electrolytic Zinc Coating process on finished Black Fittings.
- Hot Dip Zinc Galvanising: Galvanising of fittings shall be performed before the thread cutting operation, by means of the hot dip method.
Threads
- Threads for the screwed ends of fittings comply to the appropriate requirements of AS 1722 Part 1: Sealing pipe threads and also ISO 7-1.
- Female Ends: Normally supplied with parallel thread.
- Male Ends: Normally supplied with taper threads.
ELBOW, CROSS, STREET ELBOW, TEE, BOSS, COUPLING, HALF COUPLING, CAP, PLUG, BUSHING, UNION, SWAGE NIPPLE, BULL PLUG, REDUCER INSERT, PIPE NIPPLE ETC
THREADED (NPT OR BSP,ISO 7/1)
SIZE RANGE : 1/8″-4″(6mm-100mm).
1. Size: 1/8″~4″
2. Standard: ASME B16.11 MSS SP 79/83/95/97, EN10241
3. Certification: ISO 9001:2008/CE
