Monel K500 Flange,ASTM B564 UNS N05500 Flange,Alloy K500 Weld neck Flange manufacturer

Monel K500 Flange,ASTM B564 UNS N05500 Flange,Alloy K500 Weld neck Flange

Monel K500 flanges, monel K500 pipe flanges, monel k500 slip on flanges,monel k500 weld neck Flange,monel k500 blind flange

ALLOY K500,Monel K500 is a Ni-Cu alloy with age-hardening properties imparted by alloying additions of aluminium and titanium. Its basic composition is similar to that of ALLOY400 but the alloying additions make it age hardenable under
controlled conditions of temperature and time.

Alloy K500 Monel K500 is a nickel-copper alloy, precipitation hardenable through additions of aluminum and titanium. This alloy shows the corrosion resistant characteristics of grades such as Alloy 400 but with enhanced strength and hardness after precipitation hardening. However, it can be further strengthened by cold working before the precipitation hardening.

Characteristics of ASTM B564 ALLOY K500,Monel K500

excellent corrosion resistance in an extensive range of natural and chemical environments
excellent resistance to chloride-ion stress-corrosion cracking
very high strength and hardness After age-hardening

Monel K-500 Chemical composition:

Alloy	%	Ni	Cu	Al	Ti	Fe	Mn	S	C	Si
Monle K500	Min.	63	27.0	2.30	0.35
Monle K500	Max.		33.0	3.15	0.85	2.0	1.5	0.01	0.25	0.5

Monel K-500 Physical properties :

Density	8.44 g/cm3
Melting point	1315-1350℃

Monel K-500 minimum mechanical properties in the room temperature:

Status	Tensile strength Rm N/mm2	Yield strength RP0.2N/mm2	Elongation A5 %
Monel K500	1100	790	20

ASME SB564 400 /Monel K500 Flanges Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
Monel 400	2.4360	N04400	NW 4400	NA 13	МНЖМц 28-2,5-1,5	NU-30M	NiCu30Fe
Monel K500	2.4375	N05500	–	–	–	–

ASTM B564 Monel K500 Flange,Alloy K500 has approximately twice the tensile strength and triple the yield strength of Alloy 400. The strength of Alloy K-500 is maintained to 1200 degrees Fahrenheit, but stays ductile and tough down to temperatures of -400 degrees Fahrenheit. Alloy K-500 also stays non-magnetic to -200 degrees Fahrenheit.

Additional characteristics of Alloy K-500 include outstanding corrosion resistance in a wide range of chemical and marine surroundings, from salts and alkalis, non-oxidizing acids to pure water. Alloy K-500 is non-magnetic and spark resistant. It is also recommended that Alloy K-500 be annealed when it is welded and that any weldments be stress relieved prior to aging.

Industries Served:

gas & oil extraction
chemical processing
marine engineering

Specification

Grades	:	Monel K500 Flanges (UNS No. N05500)
Standards	:	ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Specifications	:	ASTM B 564 / ASME SB 564 Monel K500 Flanges
Size	:	1/8″ NB TO 48″NB.
Range	:	15 NB to 300 NB
Class	:	150#, 300#, 600#, 900#, 1500#, 2500#. PN6, PN10, PN16, PN25, PN40, PN64 etc.

Monel K500 Flange,ASTM B564 UNS N05500 Flange,Alloy K500 Weld neck Flange

Published by ADMIN on