SA182 F316L Slip On Flange,ASTM A182 F316/316L slip on Flange,ASME B16.5,SORF Flange,A182 F316L Flanges
We are the professional manufacturer and exporter of ASTM A182 F316/316L Slip on Flange,A182 F316L SORF Flange,stainless steel Flange in China.
We also supply the ASTM A182 F316/316L Flanges from BV/ABS/LR/DNV GL approved factories ,MTC 3.1,MTC 3.2 can be provided
Welding neck flange,Blind Flange,Threaded Flange are also available
SLIP ON FLANGES SPECIFICATION
Dimensions : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges etc.
Standards : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard PN6,PN10, PN16, PN25, PN40 Etc.
Size : 1/8″ NB TO 60″NB.
Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
BS : BS4504 , BS4504, BS1560, BS10
Astm A182 F316/F316L Stainless steel Flange specification
Stainless Steel Flanges, SS Flanges,
Standard: ASTM/ASME A/SA 182,
Grade: F304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L, Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
ASTM A182 F 316L Stainless Steel Flanges Dimensional Range & Standard Specification
| ASTM | A 182 |
| ASME | SA 182 |
ASTM A182 F 316/F 316L Stainless Steel Flanges Production Range
| Specification | ASTM A182 / A240 & ASME SA182 / SA240 |
| Grade | F 316L WELD NECK Flanges,F316L WELD NECK Flange,F316L WN Flange, A182 F316L WNRF flange, 1.4404 weld neck flange |
| Standard | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
| Size | 1/8″ to 60″ |
| Dimensions | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Class / Pressure | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
Test Certificates: Manufacturer Test Certificate as per EN 10204 / 3.1
A182 F316 /F316L Flange composition & Mechanical Properties
A182 f316/316L is the most commonly used austenitic stainless steel in the chemical process industry. The addition of molybdenum increases general corrosion resistance, improves chloride pitting resistance and strengthens the alloy in high temperature service. Through the controlled addition of nitrogen it is common for 316/316L to meet the mechanical properties of 316 straight grade, while maintaining a low carbon content.
A182 F316 /F316L flange composition Chemistry
| Ni | Cr | Mo | Mn | Si | C | S | P | N | Fe | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIN | 10.0 | 16.0 | 2.0 | – | – | – | – | – | – | – |
| MAX | 14.0 | 18.0 | 3.0 | 2.0 | 0.75 | 0.03 | 0.03 | 0.045 | 0.1 | Balance |
Physical Properties
Density: 0.285 lb/inch3
Poisson’s Ratio: 0.3
Electrical Resistivity: 445 Ohm-circ mil/ft
| Temperature, °F | 70 | 212 | 932 | 1832 |
| Coefficient* of Thermal Expansion, in/in°F x 10-6 | – | 9.2 | 10.1 | 10.8 |
| Thermal Conductivity Btu • ft/ft2 • hr • °F | 7.8 | – | – | – |
| Modulus of Elasticity Dynamic, psi x 106 | 29 | – | – | – |
A182 F316L Flange Mechanical Properties
Representative Tensile Properties
| Ultimate Tensile Strength, ksi | 75 |
| 0.2% Yield Strength, ksi | 30 |
| Elongation, % | 40 |
| Hardness MAX, Brinell | 217 |
Typical Tensile and Impact Properties
| Temperature, °F | 70 | 200 | 400 | 600 | 800 | 1000 | 1200 | 1400 |
| Ultimate Tensile Strength, ksi | 82.4 | 75.6 | 71.1 | 71.1 | 71.1 | 68.4 | 50.7 | 30.7 |
| 0.2 % Yield Strength, ksi | 42.4 | – | – | – | 26.5 | 23.4 | 22.6 | – |
| Charpy Impact V-notch, ft-lbs | 65 – 100 | – | – | – | – | – | – |
How to order our A182 F316L Flanges?
Example#1, A182 F316L WELD NECK FLANGE,ASME B16.5 Size 10 Inch, Pressure 600 LBS, Flanged RF, SCH 80S Wall Thickness QTY:10 pcs
Example#2, A182 F316L SLIP ON FLANGE,ASME B16.5 Size 6 Inch, Pressure 150 LBS, Flange RF, Wall Thickness QTY:5 pcs
Example#3,A182 F316L BLIND FLANGE raise face,ASME B16.5 Size 4 Inch, Pressure 300 LBS, Flange RF, Wall Thickness QTY:20 pcs
MTC EN 10204 3.1 will be supplied.
Please send inquiry to bill@cnpipefitting.com
