MONEL alloy K-500 hex bolt UNS N05500 hex bolt W.Nr. 2.4375 bolt,nuts
We are a manufacturer of MONEL alloy K-500 hex bolt UNS N05500 hex bolt W.Nr. 2.4375 bolt,nuts in China.
We can produce Bolt , Nut, Washer, Threaded rod, Split cotter Pins, R clips and machining special parts according to the drawing with material of Hastelloy,Monel,Incoloy,Inconel,Titanium , Duplex series,Nimonic and normal stainless steel.
Monel K500 hex bolt
1. Standard: Asme B 18.2.1 DIN931, DIN933, ISO4014, ISO4017
2. Grade: Monel K500
3. Material: Monel K500,2.4375,UNS N05500
4. Colour: Bright
5. Package: Bulk in 25 kg carton, then in pallet
6. Delivery time: 15-45days
MONEL® alloy K-500 (UNS N05500/ W.Nr. 2.4375) is
a nickel-copper alloy which combines the excellent
corrosion resistance of MONEL alloy 400 with the
added advantages of greater strength and hardness. The
increased properties are obtained by adding aluminum
and titanium to the nickel-copper base, and by heating
under controlled conditions so that submicroscopic
particles of Ni3 (Ti, Al) are precipitated throughout the
matrix. The thermal processing used to effect
precipitation is commonly called age hardening or
aging. The composition of the alloy is given in Table 1.
Typical applications for MONEL alloy K-500
products are chains and cables, fasteners and springs for
marine service; pump and valve components for
chemical processing; doctor blades and scrapers for
pulp processing in paper production; oil well drill
collars and instruments, pump shafts and impellers,
non-magnetic housings, safety lifts and valves for oil
and gas production; and sensors and other electronic
components
a nickel-copper alloy which combines the excellent
corrosion resistance of MONEL alloy 400 with the
added advantages of greater strength and hardness. The
increased properties are obtained by adding aluminum
and titanium to the nickel-copper base, and by heating
under controlled conditions so that submicroscopic
particles of Ni3 (Ti, Al) are precipitated throughout the
matrix. The thermal processing used to effect
precipitation is commonly called age hardening or
aging. The composition of the alloy is given in Table 1.
Typical applications for MONEL alloy K-500
products are chains and cables, fasteners and springs for
marine service; pump and valve components for
chemical processing; doctor blades and scrapers for
pulp processing in paper production; oil well drill
collars and instruments, pump shafts and impellers,
non-magnetic housings, safety lifts and valves for oil
and gas production; and sensors and other electronic
components
Table 1 – Limiting Chemical Composition, %,
of MONEL Alloy K-500
Nickel (plus Cobalt) ……………………………………………..63.0 min.
Carbon………………………………………………………………0.25 max.
Manganese ………………………………………………………….1.5 max.
Iron……………………………………………………………………..2.0 max.
Sulfur ………………………………………………………………..0.01 max.
Silicon …………………………………………………………………0.5 max.
Copper …………………………………………………………….27.0 – 33.0
Aluminum …………………………………………………………2.30 – 3.15
Titanium …………………………………………………………..0.35 – 0.85
of MONEL Alloy K-500
Nickel (plus Cobalt) ……………………………………………..63.0 min.
Carbon………………………………………………………………0.25 max.
Manganese ………………………………………………………….1.5 max.
Iron……………………………………………………………………..2.0 max.
Sulfur ………………………………………………………………..0.01 max.
Silicon …………………………………………………………………0.5 max.
Copper …………………………………………………………….27.0 – 33.0
Aluminum …………………………………………………………2.30 – 3.15
Titanium …………………………………………………………..0.35 – 0.85
