ASTM A182 F5 Flange,A182 F5a Weld neck Flange,slip on Flange,SA 182 F5 Blind Flange
C&N is a professional manufacturer of steel forged CHROME MOLY/ALLOY STEEL A182 F5 flange in China, A182 F5 Blind flange,A182 F5 weld neck flange,ANSI B16.5 A182 F5 Slip on Flange，5Cr-1/2Mo Flange.
A182 F5 Flange are used to connect with A335 P5 Pipes and A234 P5 Pipe fittings in the pipeline connections.
Dimensions : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges etc.
Standards : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
A182 F5 Class 150 lbs Flanges, Class 300 Lbs AS F5 Flanges, Class 600 Lbs ASTM A182 Alloy Steel F5 Flanges, ANSI B16.5 CrMo 900# Flanges, ASME B16.5 Alloy Steel F5 1500# Flanges, Class 2500 Lbs Chrome Moly A182 F5 Flange, ANSI B16.47 Series A or MSS SP-44 CrMo F5 Flanges, ANSI B16.47 series B or API-605 Alloy Steel A182 F5 Flange, ANSI B16.48 Alloy Steel F5 Flanges, ANSI B16.36 AS A182 F5 Flanges
A182 F5 Flange-specification-Forged material Data sheet
Specifications : ASTM A182 / ASME SA182
Size : 1 / 2″ to 60″
Class :150#, 300#, 400#, 600#, 900#, 1500# & 2500#. PN6, PN10, PN16, PN25, PN40, PN64 etc.
Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Standards : ASTM, ASME Flanges, ANSI Flanges, DIN Flanges, EN Flanges, BS Flanges etc.
ASTM A182 / A182M – 19 standard
Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A182 F5 FLANGES CHEMICAL COMPOSITION
| Grade | C | Mn | Si | P | S | Cr | Mo |
| Alloy Steel F5 | 0.15 max | 0.3-0.6 | 0.5 | 0.03 | 0.03 | 4-6 | 0.44-0.65 |
ASME SA182 F5 Alloy Steel Pipe Flanges Equivalent Grades
| STANDARD | UNS | WERKSTOFF NR. | Trade Name |
| A182 F5 | K41545 | 1.7362 | 5Cr-1/2Mo |
A182 F5 Flanges Mechanical Properties
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min |
| A182 F5 | 275 | 485 | 20 |
The percentage (%) shown on the elements is the maximum, except where ranges are indicated.
† ASTM A182/A182M-13
*NACE MR01-75 specifies 237 maximum brinell hardness
| A182 F5/F5a | 5% Chrome; 1/2% Moly, Medium Alloy Steel | A182 F5/F5a | Mild corrosive or erosive applications as well as non-corrosive applications at temperatures between -30ºC (-20ºF) and +650ºC (+1200ºF). |
A182 F5 Flanges Heat Treatment Requirement
According to ASME B16.5, pipe flanges manufactured from A182 F5 material shall be normalized and tempered at a temperature higher than 955 °C (1750 °F). The material is permissible but not recommended for prolonged use above 590 °C.
A182 F5 Flange hardness
| HARDNESS (HB) MAX* | 143 ~ 217 |
How to order A182 F5 flanges?
Example#1, ASTM A182 F5 WN RF Flange, ASME B16.5, SCH 40, 300#, 6 Inch
Example#2,ASTM A182 F5 Blind Flange RF,ASME B16.5, 150#, 8 Inch
Example#3,ASTM A182 F5 slip on Flange,raise face,ASME B16.5, 150#, 6 Inch
