AC-14 Anchor,AC-14 HHP ANCHOR LR, KR, GL, CS, ABS,BV APPROVAL

Marine AC-14 anchor 

High holding Power Anchors

stockless high holding power anchor that has wide anchor crown, thick and long flukes and longitudinal ribs. AC-14 anchor’s heavy weight and high holding power makes it good stability. It is commonly used as main anchor on large container ships, car carriers and supertankers.

An anchor is a device, normally made of metal, used to secure a vessel to the bed of a body of water to prevent the craft from drifting due to wind or current. 

We supply AC-14 Hhp Anchor with Lr Cert,AC-14 Hhp Anchor with BV Certificate.

Details:

1. Type: Stockless HHP Anchor

2. Material: High Tensile Casting Steel

3. Nominal Weight: 56kg to 20000kg

4. Application: all kinds of seabed such as mud, soil, sandstone etc.

5. Features: fast deployment, excellent stability, high holding power up to 14

6. Certificate: CCS,ABS,LR,GL,DNV,NK,BV,KR,RINA,RS etc.

C&N is a professional marine anchor supplier. We can provide all types and specifications of anchors for you. 

AC-14 anchor is a High Holding Power anchor.

AC 14 High holding power (HHP) anchors

• A “high holding power” anchor is to be suitable for ship’s use and is not to require prior adjustment or special placement on the sea bottom.
• When special type of anchors designated “high holding power anchor” of proven superior holding ability are used as bower anchors, the mass of each anchor may be 75% of the mass required for ordinary stockless bower anchors in the Table 1.
• For approval and/or acceptance as a HHP anchor satisfactory tests are to be made on various types of bottom, and the anchor is to have a holding power at least twice than of an ordinary stockless anchor of the same weight. Full scale tests are to be carried out at sea on various types of bottom and to be applied to anchors the weights of which are, as far as possible, representative of the full range of sizes proposed; for a definite group of the range the two anchors selected for testing (ordinary stockless anchors and HHP anchors) should be of approximately the same weight, and should be tested in association with the size of chain cable appropriate to this weight.

Specifications: