JIS G3454 STPG370 Seamless steel pipes

We are the professional supplier and exporter  of JIS G3454 STPG370 Seamless Pipes in China.

JIS G3454 Carbon Steel Pipes for Pressure Service

This japanese Industrial Standard specifies the carbon steel pipes, hereinafter referred to as the “pipes”, used for pressure service at an approximate maximunn temperature of 350℃. The pipes for high pressure sevice shall be in accordance with JIS G 3455. Standard: JIS G 3454  JIS G 3455  JIS G 3456  Japanese Industrial Standard Uses: For conveying oil ,gas and other fluid.

JIS-G3454-STPG370-Seamless-steel-pipes

JIS G3454 CS Pipe Specification

Size 21.3mm to 1219.2mm
Wall Thickness 2-50mm
Length max 12000mm
Standard JIS G3454, JIS G3445, JIS G3452, JIS G3444
Grade STPG370, STPG410, STKM13A, STKM14A, SGP, STK290, STK400, STK500
Steel grade STPG 38, STPG 42
Application Carbon Steel Pipes for Pressure Service
Dimension Range 10.5-660.4 mm

JIS G3454 Carbon Steel Chemical Composition (%):

Standard Grade C Si Mn P S
JIS G3454 STPG 370 ≤0.25 ≤0.35 0.30-0.90 ≤0.040 ≤0.040
STPG 410 ≤0.30 ≤0.35 0.30-1.00 ≤0.040 ≤0.040
JIS G3455 STS 370 ≤0.25 0.10-0.35 0.30-1.10 ≤0.035 ≤0.035
STS410 ≤0.30 0.10-0.35 0.30-1.40 ≤0.035 ≤0.035
STS480 ≤0.33 0.10-0.35 0.30-1.50 ≤0.035 ≤0.035
JIS G3456 STPT 370 ≤0.25 0.10-0.35 0.30-0.90 ≤0.035 ≤0.035
STPT 410 ≤0.30 0.10-0.35 0.30-1.00 ≤0.035 ≤0.035
STPT 480 ≤0.33 0.10-0.35 0.30-1.00 ≤0.035 ≤0.035

JIS G3454 Carbon Steel Mechanical Properties:

 

Standard Grade Tensile strength (Mpa) Yield strength (Mpa)
JIS G 3455 STS 370 ≥215 ≥370
STS 410 ≥245 ≥410
STS 480 ≥275 ≥480
JIS G 3456 STPT 370 ≥215 ≥370
STPT 410 ≥245 ≥410
STPT 480 ≥275 ≥480

JIS Pipe dimension is slightly different from ASTM Pipes

 

Nominal size Outside
diameter
(mm)
Carbon steel
pipes for ordinary
piping <SGP>
(JIS G3452)
Carbon steel pipes for pressure service
<STPG>(JIS G3454)
Nominal thickness
A B Thickness (mm) Sch10 Sch20 Sch30 Sch40 Sch60 Sch80
6 1/8 10.5 2.0 1.7 2.2 2.4
8 1/4 13.8 2.3 2.2 2.4 3.0
10 3/8 17.3 2.3 2.3 2.8 3.2
15 1/2 21.7 2.8 2.8 3.2 3.7
20 3/4 27.2 2.8 2.9 3.4 3.9
25 1 34.0 3.2 3.4 3.9 4.5
32 1.1/4 42.7 3.5 3.6 4.5 4.9
40 1.1/2 48.6 3.5 3.7 4.5 5.1
50 2 60.5 3.8 3.2 3.9 4.9 5.5
65 2.1/2 76.3 4.2 4.5 5.2 6.0 7.0
80 3 89.1 4.2 4.5 5.5 6.6 7.6
90 3.1/2 101.6 4.2 4.5 5.7 7.0 8.1
100 4 114.3 4.5 4.9 6.0 7.1 8.6
125 5 139.8 4.5 5.1 6.6 8.1 9.5
150 6 165.2 5.0 5.5 7.1 9.3 11.0
200 8 216.3 5.8 6.4 7.0 8.2 10.3 12.7
250 10 267.4 6.6 6.4 7.8 9.3 12.7 15.1
300 12 318.5 6.9 6.4 8.4 10.3 14.3 17.4
350 14 355.6 7.9 6.4 7.9 9.5 11.1 15.1 19.0
400 16 406.4 7.9 6.4 7.9 9.5 12.7 16.7 21.4
Appearance
The JIS G3454 STPG370 Carbon Steel Pipes shall be practically straight, and its both ends shall be at a right angle to its axis.
The inside and outside surfaces of the IS G3454 STPG370 Carbon Steel Pipes shall be well-finished and free form defects that are detrimental to practical use.
JIS G3454 STPG 370 E Welded Pipes,STPG370 Seamless Steel Pipes
Test
Chemical analysis
Tensile Test
Flattening Test
Bending Test
Hydrostatic Test of Nondestructive Examination