15X5M Elbow,15X5M Pipe fittings seamless,Elbow,Tee,Reducer
We are a professional pipe fittings & flange manufacturer.
15X5M elbow is a russian standard material used for petroleum processing and the petrochemical industry
| Grade : |
15Kh5M ( 15Х5М ) ( Х5М ) |
| Classification : |
Low alloy high-temperature steel |
Chemical composition in % for grade 15Kh5M ( 15Х5М )
| C |
Si |
Mn |
Ni |
S |
P |
Cr |
Mo |
W |
V |
Ti |
Cu |
| max 0.15 |
max 0.5 |
max 0.5 |
max 0.6 |
max 0.025 |
max 0.03 |
4.5 – 6 |
0.45 – 0.6 |
max 0.3 |
max 0.05 |
max 0.03 |
max 0.2 |
Temperature of critical points for grade 15Kh5M ( 15Х5М ).
| Ac1 = 815 , Ac3(Acm) = 848 , Ar3(Arcm) = 775 , Ar1 = 718 |
Mechanical properties under Т=20oС for grade 15Kh5M ( 15Х5М )
| Assortment |
Dimension |
Direct. |
sв |
sT |
d5 |
y |
KCU |
Heat treatment |
| – |
mm |
– |
MPa |
MPa |
% |
% |
kJ / m2 |
– |
| Pipe hot strain, GOST 550-75 |
|
|
392 |
216 |
22 |
50 |
1180 |
|
| Bar, GOST 20072-74 |
Ø 90 |
|
390 |
215 |
22 |
50 |
1180 |
Annealing 840 – 860oC,Cooling oven, |
| Sheet trick, GOST 7350-77 |
|
|
470 |
235 |
18 |
|
|
Annealing 840 – 870oC,Cooling air, |
| Brinell hardness for 15Kh5M ( 15Х5М ) (hot-rolled, annealing) , GOST 20072-74 |
HB 10 -1 = 217 MPa |
| Brinell hardness for 15Kh5M ( 15Х5М ) , Pipe GOST 550-75 |
HB 10 -1 = 170 MPa |
Equivalent steels for grade 15Kh5M ( 15Х5М )
| USA |
Germany |
Japan |
France |
European |
Italy |
China |
Hungary |
Poland |
Romania |
Czechia |
| – |
DIN,WNr |
JIS |
AFNOR |
EN |
UNI |
GB |
MSZ |
PN |
STAS |
CSN |
| 501 |
| 502 |
| K41545 |
| S50100 |
| S50200 |
| T12005 |
| T51605 |
|
| 1.7362 |
| 12CrMo19-5 |
| T5 |
| X12CrMo5 |
|
| SFVAB5A |
| STBA25 |
| STC48 |
| STFA25 |
| STPA25 |
|
| 710CD5-05 |
| Z15CD5-05 |
| Z20CD5 |
|
|
| A16CrMo25-5KG |
| A16CrMo25-5KW |
|
|
|
|
|
|
Chrome Moly A234 WP5 End Pipe Cap Exporter, Alloy Steel A234 WP5 Welded Pipe Fittings, Alloy Steel WP5 Equal Tee, ASME B16.28, MSS SP-43 Alloy Steel WP5 Reducer, WP5 Alloy Steel Pipe Fittings, Alloy Steel 5Cr-1/2Mo Pipe Fittings, A234 WP5 Long / Short Radius Elbow
ASTM A234 WP5 Pipe Fittings Specifications
| Grade Specifications |
Chrome Moly Grades P1, P5, P9, P11, P22, P91 |
| Specification |
ASTM/ ASME A/SA234 WP1, WP5, WP9, WP11, WP22, WP91 |
| Type |
Seamless / Welded / |
| Bending Radius |
R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom |
| Range |
½” NB to 48″ NB in Sch 10s, 40s, 80s, 160s, XXS. |
| Dimensions |
ANSI/ASME B16.9, B16.28, MSS-SP-43. |
| Applicable Standards |
1-ASME B 16.9 for large Bore
2-ASME B 16.11 for small Bore (socket welded)
3-ASME B 16.25 for butt weld ends |
|
|
ASTM A234 WP5 Fittings Chemical Composition
| Grade |
C |
Mn |
Si |
S |
P |
Cr |
Mo |
| A234 WP5 |
≤0.15 |
≤0.6 |
≤0.5 |
≤0.04 |
≤0.03 |
4-6 |
0.44-0.65 |
ASTM A234 WP5 Fittings Mechanical Properties
| Grade |
Tensile Strength (Mpa) |
Yield Strength (Mpa) |
Elongation % |
| A234 WP5 |
415 – 585 |
≥205 |
≥20 |
SIZES:
1/2″ N. B. TO 24″ N. B. Seamless Pipe Fittings(BW)
1/2″ N. B. TO 72″ N. B. Welded BW
Marking:Standard/ As per request
Packing: Wooden case(Fumigation free) Or as per request
Inspection: In house and third party
Document: MTC EN10204-3.1 can be provided prior to shipment
Elbow 180Deg 140×8 R127, Steel 15×5
