BS EN 10241 pipe fittings,EN 10241 ELBOW,TEE,BOSS,PLUG, BUSHING, UNION

BS EN 10241 pipe fittings are threaded steel pipe fittings designed for low-pressure and non-critical pressure piping systems. These fittings are widely used in water supply, gas distribution, fire protection, HVAC, and general industrial applications.
Manufactured in accordance with EN 10241, they ensure reliable thread accuracy, dimensional consistency, and good mechanical strength.

The product range includes elbows, tees, bosses, plugs, bushings, and unions, suitable for connecting threaded steel pipes in accordance with ISO and BSP thread standards.

C&N is a professional manufacturer of BS EN10241 Steel threaded pipe fittings

This European Standard specifies requirements for threaded fittings of nominal sizes from DN 6 to DN 150 inclusive, made out of welded or seamless steel tubes, forging and rolled bars. It is applicable to those threaded steel pipe fittings that are used in the transportation and distribution of liquid or gas

Steel pipe fittings BS EN 10241 are one of the most robust threaded fittings of their type available on the UK market and where our customer base is concerned they are primarily used on low-pressure steam systems. These 25 bar rated steel pipe fittings BS EN 10241 are ideal for steam systems running at 10 bar or less due to the strength and proven longevity of the product when fitted using red heavy tube BS EN 10255.

Our customer base for good reason have always been encouraged to use this type of fitting on process steam systems, the reason behind this thinking is the fact that despite good quality malleable iron fittings BS EN 10242 being rated for low-pressure steam systems

What Is EN 10241?

EN 10241 is a European standard that specifies the requirements for steel threaded pipe fittings used in piping systems.
It replaces the former BS 143 / BS 1256 standards and covers fittings manufactured by forging or machining.

EN 10241 defines:

• Dimensional tolerances

• Thread types

• Mechanical properties

• Surface finish

• Marking and inspection requirements

European Standard EN 10241 specifies requirements for screw threaded fittings of nominal sizes from DN 6 to DN 150 inclusive, made out of welded steel or seamless steel tubes, forging and rolled bars. It is applicable to those screw threaded steel pipe fittings that are used in the transportation and distribution of liquid or gas

2.Normative references

This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporate in it by amendments or revision. For undated references, the latest edition of the publication referred to applies (including amendmens).

EN 10204, Metallic products- Types of inspection documents.

EN ISO 6708 , Pipework components – Definition and selection of DN (nominal size) (ISO 6708:1995).

ISO 7-1: Pipe Threads where Pressure-Tight Joints are made on the Threads; Part 1: Dimensions, Tolerances and Designation.

ISO 7-2: Pipe Threads where Pressure-Tight Joints are made on the Threads; Part 2: Verification by means of Limit Gauges.

ISO 228-1: Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation.

ISO 228-2: Pipe threads where pressure-tight joints are not made on the threads – Part 2: Verification by means of limit gauges .

3 Terms and definitions

For the purposes of this standard, the following terms and definitions apply:

3.1

nominal size(DN)

DN: as defined in EN ISO 6708

NOTE The comparison between the thread size designation and the nominal size (DN) is given in Table A.1 for information only.

3.2

seamless fitting

fitting manufactured from seamless tube, forging or rolled bar.

3.3

fabricated fitting

fitting manufactured either from a welded tube or where the welding forms part of the fabrication of the fitting

3.4

tubular

fitting manufactured from medium or heavy pipe as defined in Table 6.These fittings are defined in Tables 21-24.

Product Range

• EN 10241 Elbow (90° / 45°)

• EN 10241 Tee

• EN 10241 Boss

• EN 10241 Plug

• EN 10241 Bushing

• EN 10241 Union

Thread types available:

• BSPP (G)

• BSPT (R)

• NPT (upon request)

Material & Surface Finish

• Material: Carbon steel

• Manufacturing Process: Forged / Machined

• Surface Finish:

  • Black (Self Color)

  • Hot-dip Galvanized

  • Electro-galvanized

Size Range

• Nominal Size: 1/8″ – 4″

• Thread Standard: ISO 7-1 / ISO 228

Inspection & Testing

• Dimensional Inspection

• Thread Gauge Inspection

• Visual Examination

• Surface Coating Check

• Certification: EN 10204 2.1 / 2.2 / 3.1 (on request)

Applications

• Water supply pipelines

• Gas and oil distribution

• Fire fighting systems

• HVAC systems

• General industrial piping

Related Products

• ASTM A105 Forged Steel Pipe Fittings

• ASME B16.11 Threaded & Socket Weld Fittings

• BS EN 10242 Malleable Iron Pipe Fittings

• Stainless Steel Threaded Pipe Fittings

BS EN 10241 pipe fittings

ELBOW, CROSS, STREET ELBOW, TEE, BOSS, COUPLING, HALF COUPLING, CAP, PLUG, BUSHING, UNION, SWAGE NIPPLE, BULL PLUG, REDUCER INSERT, PIPE NIPPLE ETC

THREADED (NPT OR BSP) OR SOCKET-WELD

SIZE RANGE : 1/8″-4″(6mm-100mm).

BS EN 10241 threaded pipe fittings provide a cost-effective and reliable solution for threaded piping systems. With a complete range of elbows, tees, bosses, plugs, bushings, and unions, EN 10241 fittings ensure easy installation, secure connections, and long service life across various industries.