ASTM B574 Alloy C-276 UNS N10276 Round Bar,Hastelloy C276 round bar
We are the professional exporter and supplier of UNS N10276 round bar, Hastelloy C276 round bar in china
UNS Number N10276 or: Alloy C276, Hastelloy C, Inconel® C-276. Hastelloy C276 is a nickel-molybdenum-chromium superalloy designed for outstanding corrosion resistance in a wide range of severe environments. This alloy is non magnetic, single phase and has good strength and ductility.
N10276 Equivalent Specifications
| Country | Body | Grade |
| USA | UNS | N10276 |
| France | AFNOR | NC 17 D |
| GB | BS | – |
| Germany | DIN | 2.4819 |
Excellent resistance to ferric and cupric chloride, mineral acids, chlorinated environments, formic and acetic acids, sea water and brine. Resistant to oxidation at temperatures up to 1040°C. It is widely used in chemical, petrochemical and oil industries.
- ABTN | ASTM | SAE | AISI: Alloy C276 | ASTM B574 | UNS N10276
- DIN | WNr: DIN 17744 | WNr 2.4819
- Chemical composition of UNS N10276
ASTM B574 Hastelloy C276 round bar Grade Specification
| STANDARD | WERKSTOFF NR. | UNS | JIS | EN | GOST | OR |
| Hastelloy C276 | 2.4819 | N10276 | NW 0276 | NiMo16Cr15W | ХН65МВУ | ЭП760 |
Chemical Composition UNS N10276 Hastelloy C276 round bar
| Grade | C | Mn | Si | Co | P | Fe | Mo | Ni | Cr | S | W | V |
| Hastelloy C276 | 0.010 max | 1 max | 0.08 max | 2.5 max | 0.04 max | 4 – 7 | 15 – 17 | Bal | 14.5-16.5 | 0.03 max | 3.0-4.5 | 0.35 max |
Mechanical Properties UNS N10276
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.89 g/cm3 | 1370 °C (2500 °F) | Psi – 1,15,000 , MPa – 790 | Psi – 52000 , MPa – 355 | 40% |
Abstract
This specification2covers rod of low-carbon nickelchromium-molybdenum alloys (UNS N10276, N06022, N06035, N06455, N06058, and N06059)*, low-carbon nickelmolybdenum-chromium-tantalum (UNS N06210), low-carbon nickel-chromium-molybdenum-copper alloy (UNS N06200), and low-carbon nickel-chromium-molybdenum-tungsten (UNS N06686) as shown in Table 1, for use in general corrosive service.The following products are covered under this specification: Rods 5⁄16 to 3⁄4 in. (7.94 to 19.05 mm), exclusive, in diameter, hot or cold finished, solution annealed and pickled, or mechanically descaled.Rods 3⁄4 to 31⁄2 in. (19.05 to 88.9 mm), inclusive, in diameter, hot or cold finished, solution annealed, ground or turned. Rods 1⁄4 to 3 1⁄2 in. (6.35 to 88.9 mm), inclusive, in diameter, solution annealed, cold finished, as cold finished, ground or turned (N06059 and N06686 only, see Table 2 and Table 3).
China Hastelloy C276 Round bar Material Specification:
ASTM B574/ ASME SB574 Inco C276 Round Bar
Grade: Hastelloy, Hastelloy B2 (UNS N10665), Hastelloy X, Hastelloy C-4 (UNS No. N06455), Hastelloy C-276 (UNS No. N10276), Hastelloy C 22 (UNS No. N06022), Hastelloy C 2000, Hastelloy B-3 (UNS N10675)
Size Range: 15NB to 300NB
Length: 100 mm To 3000 mm Long & Above
Certificate:EN 10204 3.1
