Aluminium Flat Bar 6082 T6 Aluminum Extrusions
We supply high quality of Aluminium Flat Bar 6082 T6 Aluminum Extrusions for shipyard,ship building.
Aluminium Angle 6082T6 is a flat shaped 6082 Aluminium Alloy bar. This alloy is in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is one of the more popular alloys in its series.
Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys and is known as a structural alloy.
EN AW-6082 is a medium strength precipitation hardenable alloy – its special feature: Extra versatility. T6 heat treatment has already been carried out in accordance with the highest quality standards.
As a relatively new alloy, the higher strength of 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy.
It is difficult to produce thin walled, complicated extrusion shapes in alloy 6082. The extruded surface finish is not as smooth as other similar strength alloys in the 6000 series.
In the T6 and T651 temper, alloy 6082 machines well and produces tight coils of swarf when chip breakers are used.
Shipbuilding flat bar
Aluminum Flat bar can be produced according to the customer’s requirement, with fixed thickness, width and length. It can reduce the cutting process for users, reduce the consumption of labor and materials, and also reduce the processing loss of raw materials.
Spec: BS EN 573-3:2009
Aluminium alloy 6082 also corresponds to the following standard designations and specifications but may not be a direct equivalent:
- AA6082
- HE30
- DIN 3.2315
- EN AW-6082
- ISO: Al Si1MgMn
- A96082
Temper Types
The most common tempers for 6082 aluminium are:
- T4
- T6511
- T651
- O
- T6
Aluminum Alloy 6082 T6 composition
| Grade | Max (%) | ||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al | |
| Alloy 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | 0.2 | 0.1 | remainder |
