PTFE Xylan1424 Blue Coated Stud Bolts,Xylan Fluoropolymer fluorocarbon Coated Stud Bolts and Nuts
C&N offers high quality of PTFE Xylan1424 Blue Coated Stud Bolts,Xylan Fluoropolymer fluorocarbon Coated Stud Bolts and Nuts
Xylan BLUE COATING,XYLAN GREEN COATING ARE ALL AVAILABLE
fluorocarbon coated stud bolts also called Fluoropolymer Coated Stud Bolts / PTFE coated stud bolt/xylan coated stud bolt
fluorocarbon also refers to PTFE materials, PTFE is a fluorocarbon solid, as it is a high-molecular-weight compound consisting wholly of carbon and fluorine.
Xylan coatings are dry-film lubricants combined in a matrix with high-temperature organic polymers developed to provide unique and desirable properties. Xylan coatings provide lubrication and controlled friction, wear resistance, heat resistance, non-stick and release properties
Whitford Quality Approved Coater Xylan 1424 Coated Stud Bolt, Xylan Coated Bolts, PTFE Fluorocarbon Coated A193 B7 Stud Bolt &A194 2H NUTS
Xylan coatings are dry-film lubricants combined in a matrix with high-temperature organic polymers developed to provide unique and desirable properties.
Xylan coatings provide lubrication and controlled friction, wear resistance, heat resistance, non-stick and release properties. At the same time they also protect from corrosion. They are extreme performance coatings – working under heavy loads, at high temperatures, in chemical and corrosive environments.
Xylan is used in a wide range of industries including automotive, oil & gas, food, aerospace and rubber manufacturing.
Xylan Coating Properties:
• Low friction: CoF as low as 0.02
• Wear resistance: even under extreme pressures
• Corrosion and chemical resistance in most environments
• Weather resistance: against sunlight, salt water and road chemicals
• Wide temperature operating range: from -420°F to +550°F (-250°C to 285°C)
• Flexible curing schedule: ambient to 750°F (400°C)
• Wide colour range: colour-code your product
• Pliability: Many Xylan coatings will bend freely and repeatedly without breaking
• Machinable: apply multiple coats of Xylan coating (most formulations) and mill to specification
• Excellent adhesion
Fluorcarbon coating-Surface Coatings XYLAN 1424
Diameter:1/4″~3 3/4″
Length:20mm~6000mm(usually 12 feet)
Grade :B7
Standard: M6-M100
Material: ASTM A193 B7.
Surface finished: PTFE Xylan Coated.
Standard: ANSI B18.1.1.
Xylan coating because of its reputation in the Oil and Gas Industry as one of the premium coating providers for bolts and nuts. As a Qualified Approved Coater, our PTFE coated bolts and nuts have been used in various countries in South America,southeast Asia.Middle east.
Xylan coatings have a broad range of properties which make them ideal for a variety of applications. Xylan differs from traditional Fluoropolymer coatings in one very important aspect … they are composite materials. Lubricants with the lowest-known coefficient of friction are combined with the newest high temperature resistant organic polymers to create Xylan coatings. Together these ingredients form “plastic alloys” with unique properties.
Xylan 1424 FluoroCarbon coated stud bolts
Description: PTFE coated fasteners class coating Xylan 1424/ xylan 1070/ xylan 1014 has superb chemical and salt-spray resistance, It performs well in caustic environments, and comes in a wide range of colors. Xylan 1424 is ideal for offshore applications and in environments from sub-sea to splash zone to radio antennas. Xylan 1424 also reduces make-uptorque by as much as 70% and can be made up and broken out numerous times with little or no damage to the coating.
Main Properties: Low coefficient of friction. Abrasion /wear resistant. Dry film lubricant. Thermoset.. Corrosion resistant.
Typical Applications: Piston casing. Compressors. Threaded fasteners.
Introduction about the Surface Treatment on the fasteners
For better rust prevention of the fasteners, we have in-house facility of manganese phosphating which we provide as a standard rust preventive coating. If customer requires any special type of coating, we provide any of the below mentioned coatings.
Hot-Dip Galvanizing
ASTM A153 – ISO 1461- UNI 3740 – BS 729
Electro Zinc Plating (with optional Hydrogen De-Embrittlement)
White – Yellow – Black – Green)UNI 4721 – ASTM B633 – BS 1706
Ptfe – Fluorocarbon Coating
Xylan 1070 Blue / Green / Red / Yellow
Ceramic Filled Fluorocarbon Coating
Xylar 1 or Xylar 2 and Xylan 1070
Aluminizing
ISO 2063
Pickling & Passivation
ASTM A380
Chromium / Zinc Coating (Dacromet 320 / 500)
ASTM F1136
Electro less Nickel Plating
ASTM B733
Nickel Plating
ASTM B689
Mechanical Zinc Coating
ASTM B695
Electro Zinc/Nickel Plating
ASTM B841
Electro Zinc/Cobalt Plating
ASTM B840
Zinc Phosphate Coating / Manganese Phosphate Coating (with optional Hydrogen De-Embrittlement)
ASTM F1137
Electro Cadmium Plating
ASTM B766
HIGH AND LOW TEMPERATURE
ASTM A193 / ASTM A320
ASTM A193 GR. B7 (AISI 4140, 4142, 4145)
ASTM A193 GR. B7M (AISI 4140, 4142, 4145)
ASTM A193 GR. B16
ASTM A320 GR. L7 (AISI 4140, 4142, 4145)
ASTM A320 GR. L7M (AISI 4140, 4142, 4145)
ASTM A320GR. L43 (AISI 8740)
ASTM A193/A320 GR. B8 CL. 2 (AISI 304)
ASTM A193/A320 GR. B8 CL. 1
ASTM A193/A320 GR. B8M CL. 2 (AISI 316)
ASTM A193/A320 GR. B8M CL. 1
ASTM A193/A320 GR. B8C CL. 2 (AISI 347)
ASTM A193/A320 GR. B8T CL. 2 (AISI 321)
SUPER HIGH TEMPERATURE &
CORROSION RESISTANCE
ASTM A435 GRADE 660 CLASS A
ASTM A435 GRADE 660 CLASS B
ASTM A435 GRADE 660 CLASS C
ASTM A435 GRADE 660 CLASS D
SUPER DUPLEX UNS S31803
SUPER DUPLEX UNS S32750
SUPER DUPLEX UNS S32760
.
ASTM A194 NUTS MATERIAL FOR
ASTM A193 / ASTM A320
ASTM A194 GRADE 2H
ASTM A194 GRADE 2HM
ASTM A194 GRADE 4
ASTM A194 GRADE 7
ASTM A194 GRADE 7M
ASTM A194 GRADE 8 (AISI 304)
ASTM A194 GRADE 8M (AISI 316)
ASTM A194 GRADE 8C (AISI 347)
ASTM A194 GRADE 8T (AISI 321)
.
Unified threads has 3 types: Coarse thread series (UNC), Fine thread series (UNF) and customized series(XUN). Customers demand 8UN Studbult more often. UN is the shorten of unified national .
TPI refers to threads per inch, so UNC (11 TPI) means it is 11 threads per inch coarse thread.
Threads Difference
Measured in TPI, UNF and UNC have, respectively, 20 threads per inch and 28 threads per inch.
UN and UNF have same included angle which is 60 deg, the difference between them is the number of threads per inch.
Coarse thread series is the most common thread system and suits for most of screws, bolts and nuts . Diameters one inch and above uses 8UN thread more often.
How to order the xylan coated stud bolts?
Example#1,
Stud Bolt 5/8″x80mm + 2 Heavy Hex Nuts ASME B18.2.1/B18.2.2/B1.1 Cl.2A/2B ASTM A 193 Gr.B7 – A 194 Gr.2H xylan blue Coated
