ASTM A210/ASME SA210 Grade C Seamless Steel tube boiler pipe
Professional manufacturer and exporter of ASTM A210/ASME SA210 Grade C Seamless Steel tube in China.
The tubing sizes and thicknesses usually furnished to this specification are 1/2 in. to 5 in. [12.7 to 127 mm] in outside diameter and 0.035 to 0.500 in. [0.9 to 12.7 mm], inclusive, in minimum wall thickness. Tubing having other dimensions may be furnished, provided such tubes comply with all other requirements of this specification..
This specification covers grades A-1 and C of Seamless Medium-Carbon Boiler and Superheater Tubes with different chemical and tensile requirements.
| Standard | ASTM A210, ASME SA210 |
| Equivalents | UNI 5462-64, DIN 17175, EN 10216-2, BS 3602 Part I, NF A 49-213, NBR 5592 |
| Materials | SA210C |
Chemistry Composition of ASTM A210/ASME SA210 SA210C
| C, % | Mn, % | Si, % | P, % | S, % |
| 0.35 max | 0.29-1.06 | 0.10 min | 0.035 max | 0.035 max |
Mechanical Properties of ASTM A210/ASME SA210 SA210C
| Tensile Strength, MPa | Yield Strength, MPa | Elongation, % | Hardness, HB |
| 485 min | 275 min | 30 min | 179 max |
ASTM A210 / A210M Tube Wall Thickness Tolerance
| Seamless, Cold-Finished Tubes | ||
| Outside Diameter
In. (mm) |
Wall thickness Tolerance % | |
| Over (+) | Under (-) | |
| 1 ½ (38.1) and under | 20 | 0 |
| Over 1½ (38.1) | 22 | 0 |
ASTM A210 / A210M Tube Outside Diameter Tolerance
| Cold-Finished Seamless Tubes | ||
| Outside Diameter
In. (mm) |
Permissible Variations In. (mm) | |
| Over (+) | Under (-) | |
| Under 1 (25.4) | 0.004 (0.10) | 0.004 (0.10) |
| 1 to 1 ½ (25.4 to 38.1), Incl | 0.006 (0.15) | 0.006 (0.15) |
| Over 11⁄2 to 2 (38.1 to 50.8), Excl | 0.008 (0.20) | 0.008 (0.20) |
| 2 to 21⁄2 (50.8 to 63.5), Excl | 0.010 (0.25) | 0.010 (0.25) |
| 21⁄2 to 3 (63.5 to 76.2), Excl | 0.012 (0.30) | 0.012 (0.30) |
ASTM A210 / A210M Tube Cut Length Tolerance
| Cold-Finished Seamless Tubes | ||
| Outside Diameter, In.(mm) |
Cut Length, in.(mm) | |
| Over (+) | Under (-) | |
| All Sizes | 3⁄16 [5] | 0 [0] |
| Under 2 (50.8) | 1⁄8 [3] | 0 [0] |
| 2 (50.8) and over | 3⁄16 [5] | 0 [0] |
| Under 2 (50.8) | 1⁄8 [3] | 0 [0] |
| 2 (50.8) and over | 3⁄16 [5] | 0 [0] |
| These permissible variations in length apply to tubes before bending. They apply to cut lengths up to and including 24 ft [7.3 m]. For lengths greater than 24 ft [7.3 m], the above over-tolerances shall be increased by 1⁄8 in. [3 mm] for each 10 ft [3 m] or fraction thereof over 24 ft or 1⁄2 in. [13 mm], whichever is the lesser. | ||
ASTM A210 / A210M Tube Hydrostatic Test Pressures
Each tube shall be subjected to the hydrostatic pressure test, or instead of this test, a nondestructive test may be used when specified by the purchaser.
| Hydrostatic Test Pressures | |
| Outside Diameter of Tube, in. [mm] | Hydrostatic Test Pressure, psi [MPa] |
| Under 1 [25.4] | 1000 [7] |
| 1 to 11⁄2 [25.4 to 38.1], excl | 1500 [10] |
| 11⁄2 to 2 [38.1 to 50.8], excl | 2000 [14] |
| 2 to 3 [50.8 to 76.2], excl | 2500 [17] |
ASTM A210 / A210M Flattening Test
One flattening test shall be made on specimens from each end of one finished tube from each lot, but not the one used for the flaring test. Tears or breaks occurring at the 12 or 6 o’clock positions on Grade C tubing with sizes of 2.375 in. [60.3 mm] in outside diameter and smaller shall not be considered a basis for rejection.
ASTM A210 / A210M Flaring Test
One flaring test shall be made on specie- men from each end of the one finished tube from each lot, but not the one used for the flattening test.
ASTM A210 Ordering Information
Orders for ASTM A210 / A210M, ASME SA210 should include the following, as required, to describe the desired material adequately:
- Quantity (feet, meters, or number of lengths),
- Name of material (seamless tubes),
- Grade,
- Manufacture (hot-finished or cold-finished),
- Size (outside diameter and minimum wall thickness),
- Length (specific or random),
- Optional requirements,
- Test report required (see section on Certification of Specification A 450/A 450M),
- Specification designation,
- Special requirements.
ASTM A210C tube specification
Product:ASTM A210C Seamless tube for boiler
Size ：44.5OD 5.1W.T. 6meters long
Standard:ASTM A210 /SA 210
