GOST 33259-2015 12X18N10T Stainless steel Flange,SS321 Flanges

GOST 33259-2015. Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements.

Prepared on the basis of GOST R 54432-2011, instead of GOST 12815-80, GOST 12816-80, GOST 12817-80, GOST 12818-80, GOST 12819-80, GOST 12820-80GOST 12821-80, GOST 12822-80   (By order of the Federal Agency for Technical Regulation and Metrology dated May 26, 2015 GOST R 54432-2011 was canceled from April 1, 2017).

This standard takes into account the main regulatory provisions of the following international standards: – ISO 7005-1: 2011 “Pipeline flanges. Part 1. Steel flanges for industrial and general service piping systems (NEQ)– ISO 7005-2: 1988, Metal flanges. Part 2. Cast iron flanges “(” Metallic flanges-Part 2: Cast iron flanges “, NEQ).

GOST 33259-2015 applies to connecting flanges of pipeline fittings (hereinafter referred to as fittings), fittings and pipelines, as well as connecting flanges of machines, equipment, instruments, branch pipes, apparatuses and tanks for nominal pressure up to PN 250 and establishes the design and dimensions of steel and cast iron flanges, determines the types of flanges, types of forms of sealing surfaces, establishes technical requirements for manufacturing, marking, testing and control.

 

Download GOST 33259-2015 in PDF

Depending on the purpose of the pipeline and the working media transported through it, flanges are made of steels of various grades, including corrosion-resistant ones:

GOST 33259 Flanges are available in below types

GOST 33259 type 01-B PN10 steel flat flange

GOST 33259 type 01-B PN16 steel flat flange

GOST 33259 type 01-B PN25 steel flat flange

GOST 33259 type 11-B PN10 steel weld neck flange

GOST 33259 type 11-B PN16 steel weld neck flange

GOST 33259 type 11-B PN25 steel weld neck flange

GOST 33259 type 11-B PN40 steel weld neck flange

GOST 33259 type 11-B PN63 steel weld neck flange

GOST 33259-2015 12X18N10T ss321 Flange

12X18N10T also known as 12KH18N10T 12Х18Н10T,which is equivalent grade as TP321 under ASTM material ,It is a titanium stabilized chromium nickel austenitic stainless steel with corrosion resistance similar to 304/304L.
12X18N10T is highly resistant to oxidation & corrosion and it possesses good creep strength

 

      Grade :   12KH18N10T   ( 12Х18Н10Т ) (   Х18Н10Т   )
      Substitute:   08Х18Г8Н2Т, 10Х14Г14Н4Т, 12Х17Г9АН4, 08Х22Н6Т, 08Х17Т, 15Х25Т, 12Х18Н9Т
      Classification :   Сryogenic structural steel
      Equivalent grades:   SS321,AISI 321

12X18N10T Equivalent ASTM/DIN Materials

Type UNS JIS EN/DIN EN/BS EN/NF ISO GB GOST
321 S32100 SUS321 X6CrNiTi18-10 321S31 X6CrNiTi18-10 15 0Cr18Ni10Ti
12X18N10T

Chemical composition in % for grade   12KH18N10T   ( 12Х18Н10Т )

C Si Mn Ni S P Cr Cu
max   0.12 max   0.8 max   2 9 – 11 max   0.02 max   0.035 17 – 19 max   0.3 (5 С – 0.8) Ti, остальное Fe

Фланец стальной плоский приварной Dn100 PN10 тип 11 из нержавеющей стали
Фланец стальной плоский приварной Dn350 PN10 тип 11 из нержавеющей стали
Фланец стальной плоский приварной Dn400 PN10 тип 11 из нержавеющей стали
Фланец стальной плоский приварной Dn500 PN10 тип 11 из нержавеющей стали