A358 TP347 CL1 Stainless Steel Welded Pipe,A358 TP347 EFW Pipes
We are the professional exporter and supplier of A358 TP347 CL1 Stainless Steel Welded Pipe,A358 TP347 EFW Pipes
A358 TP347 stainless steel pipe is a high carbon austenitic stainless steel pipe, with an excellent heat-resistance material which is applied to boiler, heat exchanger, car and aircraft exhaust, chemical equipment etc. As a higher grade from AISI 321H, the intergranular corrosion of 347H is achieved through the use of niobium (Nb) as a stabilizing element to maximize this feature. SS 347 has a good mechanical properties welding performance, excellent resistance to intergranular corrosion .
A358 TP347 CL1 EFW Pipe specification.
ASTM A358 Grade 347 EFW Welded Pipes in Class 1 / 2 / 3 / 4 / 5; Heavy Wall Welded Large Diameter Pipes in Corrosion Resistant Alloys suitable for Cryogenic Service.
1. Material Grade: TP304 , TP304L , TP304H , TP316 , TP316L , TP316Ti , TP309S , TP310S , TP321 , TP321H , TP347 , TP347H , etc
2. Outer Diameter: 10.3mm-1219mm
Wall Thickness : 1.24mm-59.54mm
3. Length: Normally fixed length 6m , can as per customer’s requirement
4. Standard: ASTM A312 ; ASTM A358 ; ASTM A789 ; ASTM A790 ect .
5. Process Method: ERW , EFW etc
seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service.
TP347 S34709 stainless steel are austenitic stainless steels that contain stabilizing elements. This alloys is easily welded. Annealing may not be required after welding unless stress relief is desired. 347 stainless steel has excellent resistance to oxidation and corrosion. With high creep strength, 347 stainless steel work best up to 1600 °F. The addition columbium plus tantalum in 347 stainless steel give some desired characteristic.
ASTM A358 ASME SA358 STAINLESS STEEL EFW PIPES
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
ASTM A358 Stainless Steel EFW Pipes specification covers electric-fusion-welded austenitic chromium-nickel stainless steel pipe suitable for corrosive or high-temperature service, or both, or for general applications.
This specification covers the grades of alloy and stainless steel listed in Table 1. The selection of the proper grade and requirements for heat treatment shall be at the discretion of the purchaser, dependent on the service conditions to be encountered.
ASTM A358 TP347H Pipe Equivalent Material
EQUIVALENT GRADES FOR STAINLESS STEEL TP347 / 347H CLASS 1 EFW PIPES
| STANDARD | WERKSTOFF NR. | UNS | JIS | GOST | EN |
| SS 347 | 1.4550 | S34700 | SUS 347 | 08Ch18N12B | X6CrNiNb18-10 |
| SS 347H | 1.4961 | S34709 | SUS 347H | – | X6CrNiNb18-12 |
| Grade | C | Mn | Si | P | S | Cr | Cb | Ni | Fe |
| SS 347 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 – 20.00 | 10xC – 1.10 | 9.00 – 13.00 | 62.74 min |
| SS 347H | 0.04 – 0.10 | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 – 19.00 | 8xC – 1.10 | 9.0 -13.0 | 63.72 min |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation/td> |
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
A312 TP347H Stainless pipe Heat Treatment and Gain Size Requirement
Tests and Inspection Of ASTM A347 TP347H Stainless Steel Pipe
Example#1,A358 TP347, 16 inch Stainless Steel Welded Pipe,Sch 140,6000mm length
