ASTM A 213 T11 Pipes,ASTM A 213 T11 tubes,ASME SA213 T11 Alloy Steel Seamless SMLS Tube,U bend tube
We are a professional ASTM A 213 T11 Pipes,ASTM A 213 T11 tubes,ASME SA213 T11 Alloy Steel Seamless SMLS Tube supplier and exporter in China.
We can supply both ASME SA213 T22 Straight tube and SA213 T11 U bend tube ,SA213 T11 Boiler Tube
ASTM A 213 T11 Pipe specifcation:
Size (Seamless) | : | 6.35mm o.d to 152.4 mm o.d |
Standards | : | ASTM A213, ASME SA213 |
Equivalent Standards | : | EN 10216-2, ASTM A335, GOST 550-75, S50400, WN 1.7386 |
Material | : | T11, K11597 |
Equivalent Material | : | P11 |
Type | : | Seamless |
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
ASTM A213 / ASME SA213 T11 Alloy Steel SMLS Tubes Chemical Compositions
C, % | Mn, % | P, % | S, % | Si, % | Cr, % | Mo, % |
0.15 max | 0.30-0.60 | 0.025 max | 0.025 max | 0.50-1.00 | 1.00-1.50 | 0.44-0.65 |
Mechanical Properties of ASTM A213 / ASME SA213 T11 Alloy Steel SMLS Tubes:
Tensile Strength , MPa | Yield Strength, MPa | Elongation, % | Hardness, HB |
415 min | 205 min | 30 min | 179 max |
ASME SA 213 Alloy Steel T11 Tubes Outside Diameter & Tolerance :
Hot rolled | Outside Diameter, mm | Tolerance, mm |
OD≤101.6 | +0.4/-0.8 | |
101.6<OD≤190.5 | +0.4/-1.2 | |
190.5<OD≤228.6 | +0.4/-1.6 | |
Cold Drawn | Outside Diameter, mm | Tolerance, mm |
OD<25.4 | ±0.10 | |
25.4≤OD≤38.1 | ±0.15 | |
38.1<OD<50.8 | ±0.20 | |
50.8≤OD<63.5 | ±0.25 | |
63.5≤OD<76.2 | ±0.30 | |
76.2≤OD≤101.6 | ±0.38 | |
101.6<OD≤190.5 | +0.38/-0.64 | |
190.5<OD≤228.6 | +0.38/-1.14 |
Grade T11 Wall thickness & Tolerance :
Hot rolled | Outside Diameter, mm | Tolerance, % |
OD≤101.6, WT≤2.4 | +40/-0 | |
OD≤101.6, 2.4<WT≤3.8 | +35/-0 | |
OD≤101.6, 3.8<WT≤4.6 | +33/-0 | |
OD≤101.6, WT>4.6 | +28/-0 | |
OD>101.6, 2.4<WT≤3.8 | +35/-0 | |
OD>101.6, 3.8<WT≤4.6 | +33/-0 | |
OD>101.6, WT>4.6 | +28/-0 | |
Cold Drawn | Outside Diameter, mm | Tolerance, % |
OD≤38.1 | +20/-0 | |
OD>38.1 | +22/-0 |
Length: 5800mm; 6000mm; 6096mm; 7315mm; 11800mm; 12000mm; customized
ASME SA213 T11 tube Quality control
- The Steel shall be killed.
- The Tubes shall be made by the seamless process and shall be either hot-finished or cold finished, as specified.
- Heat Treatment – Ferritic Alloy and Ferritic Stainless Steels – The ferritic alloy and ferritic stainless steels shall be reheated for heat treatment in accordance with the requirements of Standard. Heat treatment shall be carried out separately and in addition to heating for hot forming.
- Flattening Test—One flattening test shall be made on specimens from each end of one finished tube, not the one used for the flaring test, from each lot
- Flaring Test—One flaring test shall be made on specimens from each end of one finished tube, not the one used for the flattening test, from each lot
- Hydrostatic or Nondestructive Electric Test—Each tube shall be subjected to the nondestructive electric test or the hydrostatic test. The type of test to be used shall be at the option of the manufacturer, unless otherwise specified in the purchase order.
Note:
- Mill test certificates will be issued according to EN10204.3
- All tubes shall be supplied as per applicable ASME SA213M / SA213 Specification
Packing and Marking
- Packed in bundles or ply wooden box wrapped in plastic, and suitably protected for sea-worthily delivery or as requested.
- Marking prescribed in Specification A 1016/A 1016M, the marking shall include whether the tube is hot-finished or cold-finished and including not limited: Standard, graded, size, heat no. lot no.
Popular size for ASME SA213 T11 tube
WT: | 0.89MM, 1MM, 1.24MM, 1.5MM, 1.65MM, 2MM, 2.11MM, 2.463MM, 2.5MM, 2.77MM, 3.05MM, 3.4MM | Application: | Boiler,Heat Exchanger, Cooling, Condenser , Heater |
---|---|---|---|
OD: | 6.35MM , 9.52MM, 12.7MM , 15.88MM , 19.05MM, 20MM, 22,23MM, 25MM, 25.4MM , 31.75MM, 38.1MM , 44.45MM, 50.8MM , 63.5MM , 76.2MM, 88.9MM, 101.6MM, 152.4MM | NDT: | ET / UT/ HT/ P |