ASTM A179 tube,A179M Seamless Cold-Drawn Tube,Low-Carbon Steel Heat-Exchanger and Condenser Tubes,ASTM A179 heat exchange tube
We offer Heat Exchanger Steel Tubing under specification ASTM / ASME / SA / A179.
ASTM A179/A179M is the standard specification for Seamless Cold-Drawn Low-Carbon Steel Heat Exchanger and Condenser Tubes.
ASTM A179 tubes for heat exchanger
ASTM A179 covers tubes 1/8 to 3 in. [3.2 to 76.2 mm], inclusive, in outside diameter.
ASTM A179 seamless steel tube
ASTM A179/A179M, ASME SA179/SA179M is the standard applicable to Seamless cold drawn low carbon steel heat exchanger and condenser tubes.
ASTM A179 or ASME SA179 cold drawn seamless carbon steel tube is applicable to tubular heat exchanger, condenser different similar heat transfer equipment with the minimum wall thickness.
This type of cold drawn seamless steel tube is widely used in chemical engineering, carbon treatment, oil refining, nuclear electric power generation, aviation, and so forth. STM A179 or ASME SA179 seamless carbon steel pipe is also used for manufacturing boiler water cold wall, economizer, reheater and steam cylinder.
ASTM A179 tube Chemistry Composition:
|
C, %
|
Mn, %
|
P, %
|
S, %
|
|
0.06-0.18
|
0.27-0.63
|
0.035 max
|
0.035 max
|
ASTM A179 tube Mechanical Properties:
|
Tensile Strength, MPa
|
Yield Strength, MPa
|
Elongation, %
|
Hardness, HRB
|
|
325 min
|
180 min
|
35 min
|
72 max
|
- A179 black steel pipe minimum carbon content is 0.06%.
- The seamless steel tube minimum tensile strength of 325MPa, yield strength of 180MPa.
- The minimum elongation of A179 seamless pipe is 20%.
ASTM A179 Steel Pipes Application
A179 seamless steel pipe is widely used in industries such as petroleum, chemical, medical, food, light industry, machinery, instrument, include industrial pipeline and mechanical structure parts, etc.
Standard:ASTM A179
Delivery time : Promptly ( Stock) or 10-40 days (Production)
Stock : some are Available MTC: Available
Main ASTM A179 (ASME SA179) cold drawn steel tube.
Typical Sizes Normal Size:
OD. (In,mm):
3/4” (19.05mm);
1” (25.4mm);
1¼” (31.75mm);
1½” (38.1mm);
2” (50.8mm);
2½” (63.5mm);
3” (76.2mm).
Wall Thickness (BWG, mm):
16BWG (1.651mm);
14BWG(2.108mm);
12BWG(2.769mm);
10BWG(3.404mm);
8BWG(4.191mm)
Length(ft, mm):
16ft(4877mm);
20ft(6096mm);
24ft(7315mm);
Any other fixed length.
ASTM A179 tube/ASME SA179 Tube Wall Thickness Tolerance
| Seamless, Cold-Finished Tubes | ||
| Outside Diameter In. (mm) |
Wall thickness Tolerance % | |
| Over (+) | Under (-) | |
| 1 ½ (38.1) and under |
20 | 0 |
| Over 1½ (38.1) | 22 | 0 |
ASTM A179/ASME SA179 Tube Outside Diameter Tolerance
| Cold-Finished Seamless Tubes | ||
| Outside Diameter In. (mm) |
Permissible Variations In. (mm) | |
| Over (+) | Under (-) | |
| Under 1 (25.4) | 0.004 (0.1) | 0.004 (0.1) |
| 1 to 1 ½ (25.4 to 38.1), Incl | 0.006 (0.15) | 0.006 (0.15) |
| Over 11⁄2 to 2 [38.1 to 50.8], Excl | 0.008 (0.2) | 0.008 (0.2) |
| 2 to 21⁄2 [50.8 to 63.5], Excl | 0.010 (0.25) | 0.010 (0.25) |
| 21⁄2 to 3 [63.5 to 76.2], Excl | 0.012 (0.3) | 0.012 (0.3) |
ASTM A179/ASME SA179 Tube Cut Length Tolerance
| Cold-Finished Seamless Tubes | ||
| Outside Diameter, In.(mm) |
Cut Length ,in.(mm) | |
| Over(+) | Under(-) | |
| All Sizes | 3⁄16 [5] | 0 [0] |
| Under 2 [50.8] | 1⁄8 [3] | 0 [0] |
| 2 [50.8] and over | 3⁄16 [5] | 0 [0] |
| Under 2 [50.8] | 1⁄8 [3] | 0 [0] |
| 2 [50.8] and over | 3⁄16 [5] | 0 [0] |
| These permissible variations in length apply to tubes before bending. They apply to cut lengths up to and including 24 ft [7.3 m]. For lengths greater than 24 ft [7.3 m], the above over-tolerances shall be increased by 1⁄8 in. [3 mm] for each 10 ft [3 m] or fraction thereof over 24 ft or 1⁄2 in. [13 mm], whichever is the lesser. | ||
ASTM A179/ASME SA179 Tube Hydrostatic Test Pressures
| Hydrostatic Test Pressures | |
| Outside Diameter of Tube, in. [mm] | Hydrostatic Test Pressure, psi [Mpa] |
| Under 1 [25.4] | 1000 [7] |
| 1 to 11⁄2 [25.4 to 38.1], excl | 1500 [10] |
| 11⁄2 to 2 [38.1 to 50.8], excl | 2000 [14] |
| 2 to 3 [50.8 to 76.2], excl | 2500 [17] |
ASTM A179 / ASME SA179 is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
Max length is 28000mm
ASME SA179 Tube Packing:
- Packed in wooden box or bundles protected with plastic paper, and suitably protected for sea-worthily delivery or as requested.
- The Product marking shall include the ASTM A179 or ASME SA179, size, heat no., Lot No. and Manufacture name or logo.
ASME SA179 U bending tubes can be supplied also.
How to order our ASTM A179 Tubes?
ASTM A179 Seamless cold drawn Tube 3/4 Inch,16BWG, length 5200mm
