ASTM A182 F304 Flange,A182 F304L Flange,weld neck flange,Slip on Flange,blind flanges,ss304 Flange

ASTM-A182-F304 Weld neck Flange.A182 F04L Flanges-ASME B16.5

ASME /ANSI B16.5, B16.47 BLIND FLANGES SPECIFICATION

Dimensions : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges etc.

Standards : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings

Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.

Size : 1/8″ NB TO 48″NB.

Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673

ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48

BS : BS4504 , BS4504, BS1560, BS10

 

ASTM A182 F 316L Stainless Steel Flanges, SS Flanges,

SS Grades: F 304 – F 304L – F 304H – F 310 – F 310S – F 316 – F 316L – F 317 – F 317L – F 321 – F 321H – F 347 – F 347H – F 410 – F 446 – F 904L – F 51

Standard: ASTM/ASME A/SA 182, ASTM/ASME A 240 SA240
Grade: F304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L, Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
ASTM A182 F 316L Stainless Steel Flanges Dimensional Range & Standard Specification
Specification:StandardsDesignation

ASTM A 182
ASME SA 182
ASTM A182 F304L Flange Chemical Compostion

The chemical composition of grade ASTM A182 F304L Flange is outlined in the following table

C Mn Si P S Cr Ni N
304 0.07max 2.0max 0.75max 0.045max 0.03max min: 18.0 max: 20.0 min: 8.0 max: 10.5
304L 0.03max 2.0max 0.75max 0.045max 0.03max min: 18.0 max: 20.0 min: 8.0 max: 12.0 0.10 max
304H min: 18.0 max:20.0 min: 8.0 max: 10.5 min: 0.04 max:0.10 0.75 max 2.0 max 0.045 max 0.03 max 0.10 max
ASTM A182 F304L Flange Mechanical  Properties

The mechanical properties of grade ASTM A182 F304L Flange are displayed in the following table.

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304 515 205 40 92 201
304L 485 170 40 92 201
304H 515 205 40 92 201
304H also has a requirement for a grain size of ASTM No 7 or coarser.

ASTM A182 F 304L Stainless Steel Flanges Production Range

Specification ASTM A182 / A240 & ASME SA182 / SA240
Grade F 304L,F304L,316, 316L, 316H, 316LN
Standard ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Size 1/8″ to 36″
Dimensions ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Class / Pressure 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.

Test Certificates: Manufacturer Test Certificate as per EN 10204 / 3.1