ASTM A182 F304L Plug,A182 F304L Threaded Hex Head Plug,A182 F304 NPT PLUG,Hexagonal head plug screw
We are a professional manufacturer of A182 F304L Plug, A182 F304L Shoulder plug UNF threaded Plug in china.
Plugs just Like the end caps which are used to seal the end of piping system but plugs are available only in threaded / screwed type
Shoulder plug or header plug are made for plugs type header boxes in air cooled heat exchangers or fin fan air coolers. A shoulder plugs and gasket are located opposite each tube which allows access for inspection and cleaning of individual tubes. Spare plugs and gaskets may be needed to replace originals during routine maintenance or used to plug leaking tubes.
Header Plugs are installed in upstream offshore/onshore oil production and initial processing installations. Header Plugs are made from Stainless Steel 316 , SS 304 ,Duplex ,Super Duplex,Carbon Steel A105N
Threaded hexagonal plugs, also known as threaded pipe caps, threaded caps, threaded pipe caps, threaded stuffy heads, are installed on the external threads of the pipe ends to cover the pipe fittings
ASTM A182 F304L plug is a type of forged fitting made from low-carbon stainless steel. It is commonly used to seal pipe ends or block openings in piping systems. “F304L” refers to the low-carbon version of 304 stainless steel, which improves corrosion resistance after welding and minimizes carbide precipitation
Hexagonal head plug screw
Material: ASTM-A182 F304L (include forging)
Size: 1 1/8 IN-12 UNF 2A X 35 MM Length
Chemical Composition of ASTM A182 F304L
| Element | Composition (% by Weight) |
|---|---|
| Carbon (C) | 0.03 (maximum) |
| Manganese (Mn) | 2.00 (maximum) |
| Phosphorus (P) | 0.045 (maximum) |
| Sulfur (S) | 0.03 (maximum) |
| Silicon (Si) | 0.75 (maximum) |
| Chromium (Cr) | 18.0 – 20.0 |
| Nickel (Ni) | 8.0 – 12.0 |
| Iron (Fe) | Balance |
Mechanical Properties of ASTM A182 F304L
| Property | Value |
|---|---|
| Tensile Strength | 70 ksi (485 MPa) minimum |
| Yield Strength | 25 ksi (170 MPa) minimum |
| Elongation | 25% minimum |
| Hardness | 187 HBW maximum |
HEADER / SHOULDER PLUG 1-1/8″ A182 F304L for Heat Exchanger & Fin Fan Cooler.
Material:A182 F316/L
- Plug Diameter: 1-1/8 in
- Standard UNF: 12
- Length Under Head: 1-1/8 in
- Hex Head Diameter: 1-3/8
