ASTM A182 F316/316L Weld Neck Flange,stainless steel Weld Neck flange,A182 F316L Flanges

 

We are the professional manufacturer of ASTM A182 F316/316L Weld Neck Flange

 

A182-F316L-Weld-Neck-FlangesSA182-F316-316L-weld-Neck-Flange-16in-A182-F316L-Flange

ASME /ANSI B16.5, B16.47 WELD NECK FLANGES SPECIFICATION

Dimensions : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges etc.

Standards : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings

Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.

Size : 1/8″ NB TO 48″NB.

Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673

ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48

BS : BS4504 , BS4504, BS1560, BS10

Astm A182 F316/F316L Stainless steel Flange specification

Stainless Steel Flanges, SS Flanges,

SS Grades: F 304 – F 304L – F 304H – F 310 – F 310S – F 316 – F 316L – F 317 – F 317L – F 321 – F 321H – F 347 – F 347H – F 410 – F 446 – F 904L – F 51

Standard: ASTM/ASME A/SA 182,
Grade: F304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L, Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
ASTM A182 F 316L Stainless Steel Flanges Dimensional Range & Standard Specification

ASTM A 182
ASME SA 182

ASTM A182 F 316L Stainless Steel Flanges Production Range

Specification ASTM A182 / A240 & ASME SA182 / SA240
Grade F 316L WELD NECK Flanges,F316L WELD NECK Flange,F316L WN Flange, A182 F316L WNRF flange, 1.4404 weld neck flange
Standard ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Size 1/8″ to 48″
Dimensions ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Class / Pressure 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.

Test Certificates: Manufacturer Test Certificate as per EN 10204 / 3.1

A182 F316 /F316L Flange composition & Mechanical Properties

f316/316L is the most commonly used austenitic stainless steel in the chemical process industry. The addition of molybdenum increases general corrosion resistance, improves chloride pitting resistance and strengthens the alloy in high temperature service. Through the controlled addition of nitrogen it is common for 316/316L to meet the mechanical properties of 316 straight grade, while maintaining a low carbon content.

A182 F316 /F316L Flange composition Chemistry

Ni Cr Mo Mn Si C S P N Fe
MIN 10.0 16.0 2.0
MAX 14.0 18.0 3.0 2.0 0.75 0.03 0.03 0.045 0.1 Balance
Physical Properties

Density: 0.285 lb/inch3
Poisson’s Ratio: 0.3
Electrical Resistivity: 445 Ohm-circ mil/ft

Temperature, °F 70 212 932 1832
Coefficient* of Thermal Expansion, in/in°F x 10-6 9.2 10.1 10.8
Thermal Conductivity Btu • ft/ft2 • hr • °F 7.8
Modulus of Elasticity Dynamic, psi x 106 29
A182 F316L Flanges Mechanical Properties

Representative Tensile Properties

Ultimate Tensile Strength, ksi 75
0.2% Yield Strength, ksi 30
Elongation, % 40
Hardness MAX, Brinell 217

Typical Tensile and Impact Properties

Temperature, °F 70 200 400 600 800 1000 1200 1400
Ultimate Tensile Strength, ksi 82.4 75.6 71.1 71.1 71.1 68.4 50.7 30.7
0.2 % Yield Strength, ksi 42.4 26.5 23.4 22.6
Charpy Impact V-notch, ft-lbs 65 – 100

 

How to order our SS316L Flanges,ASME B16.5 A182 F316L Flanges?

Material: A182 F316L
Size: 16″ (DN400)

Type:Weld neck flange
Standard: ASME B16.5
Pressure: 150lbs
Surface finish facing: Raise Face

A182 F316L Weld Neck Flange