ASTM A234 WP9 Elbow,A234 WP9 Pipe fittings,ASTM A234 WP9 Pipe fitting Elbow,Tee,Reducer,
We are a professional A234 WP9 pipe fittings,A234 Wp9 elbow,A234 Wp9 Tee,A234 WP9 reducers and caps manufacturer in China
ASTM A234 P9,also known as S50400,is a chrom moly alloy steel ,which is the most commonly used in oil refineries industries
We can produce high quality Chrome Moly Alloy steel pipe fittings in China
Astm A234 wp9 elbow,SA 234 WP9 elbow,SA234 WP9 LR elbow,A234 WP9 SR elbow, A234 WP9 Return bend.
A335 Gr P9 seamless pipe is the starting material to produce A234 WP9 fittings.
A234 WP9 elbow,A234 WP9 LR elbow 90deg,A234 WP9 SR elbow 90deg,
A234 WP9 euqal Tee,A234 WP9 reducing Tee seamless
A234 WP9 Reducer,concentric reducer,eccentric reducer
Alloy Steel A234 WP9 Elbows – Long Radius
Alloy Steel A234 WP9 Elbows – Short Radius
Alloy Steel A234 WP9 45° Elbows
Alloy Steel A234 WP9 180° LR Return Bends
Alloy Steel A234 WP5 180° SR Return Bends
ASME B16.9 A234 WP9 Steel pipe Fittings dimension
Butt-welding fittings and butt-welding short radius elbows and returns purchased in accordance with this specification shall conform to the dimensions and tolerances given in the latest revision of ASME B16.9. Steel socket-welding and threaded fittings purchased in accordance with this specification shall conform to the sizes, shapes, dimensions, and tolerances specified in the latest revision of ASME B16.11, MSS-SP-79, or MSS-SP-83. Swage (d) Nipples, Bull Plugs, and Integrally Reinforced Forged Branch Outlet Fittings purchased in accordance with this specification shall conform to the sizes, shapes, dimensions, and tolerances specified in the latest revision of MSS-SP-95 or MSS-SP-97.
Alloy Steel WP9 Pipe Fittings are used in Marine engineering, Chemical processing, Heat exchangers, Valves manufacturing, Pumps manufacturing, Petrochemical plants, Nuclear power projects, Oil & Gas equipment manufacturing. We procure raw materials to manufacture Alloy steel A234 WP9 Pipe Fittings from ISO and PED approved mills
| Grade | C | Mn | Si | S | P | Cr | Mo |
|---|---|---|---|---|---|---|---|
| A234 WP9 | ≤0.15 | ≤0.6 | 1.00 | ≤0.03 | ≤0.03 | 8-10 | 0.90-1.10 |
| Grade | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation % |
|---|---|---|---|
| A234 WP9 | 380 min | 585 min | ≥30 |
Material:
Alloy Steel: ASTM A234 / WP5/ WP9/ WP11/ WP22/ WP91
Stainless Steel: ASTM A403 WP 304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/ 904L/ etc.
Carbon Steel: ASTM A234 WPB / A420 WPL3/ A420 WPL6/ MSS-SP-75 WPHY 42/46/52/56/60/65/70 etc.
SIZES:
1/2″ N. B. TO 24″ N. B. Seamless Pipe Fittings(BW)
1/2″ N. B. TO 72″ N. B. Welded BW
Marking:Standard/ As per request
Packing: Wooden case(Fumigation free) Or as per request
Inspection: In house and third party
Document: MTC EN10204-3.1 can be provided prior to shipment
ASTM A234 WP9 Elbow heat treatment requirement
Pipe fittings of ASTM A234 alloy steel, after forming at an elevated temperature, shall be cooled to a temperature. below the critical range under suitable conditions to prevent injurious defects caused by too rapid cooling, but in no case more rapidly than the cooling rate in still air.
Fittings of Grades WP9 shall be furnished in the full-annealed, isothermal-annealed, or normalized and tempered condition. If normalized and tempered, the tempering temperature for Grades WP9, the tempering temperature shall not be less than 1250 °F [675 °C].
ASTM A234 WP9 Elbow hardness requirement
Fittings for ASTM A234 WP9 Pipe fittings, 217 HBW maximum hardness.
How to order our ASTM A234 WP9 Elbow?
Example.90Deg Elbow 14In ASTM A234 WP9 SCH120 LR ASME B16.9
