We have a new shipment of ASTM A312 TP316/TP316L Seamless stainless steel pipe for our Vietnam customer
ASTM A312 Grade TP316 and TP316L refer to stainless steel 316 and 316L, respectively. The prefix “TP” indicates the “type” of stainless steel. TP316 or TP316L pipe is available in seamless or longitudinally welded types, with butt-welded or threaded ends. TP316 is derived from the classic “18-8” (TP304) stainless steel with the addition of molybdenum for enhanced pitting resistance in chloride environments. TP316L is a low carbon version of TP316 where the low carbon content increases sensitization for better weld corrosion resistance.
Their order size and quantity as below
# | Product Description | UOM | Q-ty |
1 | 6″ PIPE;SMLS;BE;SCH 120;SS ASTM A312 GR TP316/316L NACE MR-01-75 BE,Bevelled END | mtr | 60 |
2 | 2″ PIPE;SMLS;BE;SCH 40S;SS ASTM A312 GR TP316/316L NACE MR-01-75 BE,Bevelled END | mtr | 120 |
3 | 4″ PIPE;SMLS;BE;SCH 80S;SS ASTM A312 GR TP316/316L NACE MR-01-75 BE,Bevelled END | mtr | 24 |
4 | 6″ PIPE;SMLS;BE;SCH 80S;SS ASTM A312 GR TP316/316L NACE MR-01-75 BE,Bevelled END | mtr | 60 |
5 | 8″ PIPE;SMLS;BE;SCH 40S;SS ASTM A312 GR TP316/316L NACE MR-01-75 BE,Bevelled END | mtr | 120 |
6 | 12″ PIPE;SMLS;BE;SCH 40S;SS ASTM A312 GR TP316/316L NACE MR-01-75 BE,Bevelled END | mtr | 30 |
7 | 16″ PIPE;SMLS;BE;SCH 40S;SS ASTM A312 GR TP316/316L NACE MR-01-75 BE,Bevelled END | mtr | 60 |
ASTM A312 TP316L Chemical Composition
Grade | C | Si | Mn | Cr | Ni | Mo | S | P |
---|---|---|---|---|---|---|---|---|
TP316L | 0,035 | 1,0 | 2 | 16 – 18 | 10 – 15 | 2 – 3 | 0,03 | 0,045 |
* Maximum value, unless otherwise indicated.
ASTM A312 TP316L Mechanical Properties
Grade | Tensile Strength(Mpa) | Yield Point(Mpa) | Elongation(%) |
---|---|---|---|
316L | 485 | 170 | 35 |
ASTM A312 TP316L Pipes Inspection & Tests we conducted
Visual examination, dimensional inspection, PMI chemical analysis, tensile test, flattening test, bend test, eddy-current test, etching test, radiographic examination (for welded pipes), intergranular corrosion test (upon request).
ASTM A312 TP316/ TP316L seamless pipes are generally furnished in sizes 1/2″ through 24″, while ASTM A312 TP316/ TP316L welded pipes are available from 1-1/2″ through 48″. The wall thicknesses shall be furnished in accordance with ASME B36.10M or ASME B36.19M. The pipes are usually supplied in lengths of 6.096 m (20′), 12.19 m (40′), 6 m, and 12 m, etc. No pipe shall be under the specified length and no pipe shall be more than 0.25″ [6 mm] over the specified length.