ASTM A815 UNS S31803 1.4462 Duplex stainless steel Pipe Fittings elbow reducer Tee Stub end
We are a Duplex stainless steel ASTM A815 WP UNS S31803 elbow,A815 WP S31803 elbow manufacturer
We can produce high quality stainless steel elbow
Duplex stainless steel ASTM A815 WPS S31803 Pipe fittings elbow
90deg stainless steel ASTM A815 WPS S31803 elbow
45deg stainless steel ASTM A815 WPS S31803 Pipe fittings elbow
Long Radius ASTM A815 UNS S31803 Elbow
Short Radius ASTM A815 UNS S31803 Elbow
We can produce high quality duplex stainless steel pipe fittings,Duplex stainless steel
A815 UNS S31803 /1.4462 Chemical Composition
| Chemical Element | % Present |
|---|---|
| Carbon (C) | 0.0 – 0.03 |
| Chromium (Cr) | 21.00 – 23.00 |
| Manganese (Mn) | 2.00 max |
| Silicon (Si) | 1.00 max |
| Phosphorous (P) | 0.0 – 0.03 |
| Sulphur (S) | 0.0 – 0.02 |
| Nickel (Ni) | 4.50 – 6.50 |
| Nitrogen (N) | 0.08 – 0.20 |
| Molybdenum (Mo) | 2.50 – 3.50 |
| Iron (Fe) | Balance |
ASTM A815 ~ S31803
ASTM A815 / A815M – 18
Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
This specification covers two general classes,
WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction. Class WP fittings are subdivided into four subclasses: Classes WP-S, WP-W, WP-WX, and WP-WU.
The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products. The steel shall be melted by electric furnace, vacuum furnace, or electric furnace followed by vacuum or electroslag-consumable remelting. Forging or shaping operations shall be performed by hammering, pressing, piercing, extruding, upsetting, rolling, bending, fusion welding, machining or by combination of two or more of these operations. The materials shall undergo heat treatment and shall follow the required cooling process and tempering temperature. Chemical and product analyses shall be performed and shall conform to the required chemical composition in carbon, manganese, phosphorus, silicon, sulfur, nickel, chromium, molybdenum, copper, nitrogen, and titanium. The mechanical properties of the fitting material shall conform to the required values in yield strength, tensile strength, elongation, and hardness.
Duplex stainless steel A815 UNS S31803 are extremely corrosion resistant, work hardenable alloys. Their microstructures consist of a mixture of austenite and ferrite phases. As a result, duplex stainless steels display properties characteristic of both austenitic and ferritic stainless steels. This combination of properties can mean some compromise when compared with pure austenitic and pure ferritic grades.
Duplex stainless steels A815 UNS S31803 are in most cases, tougher than ferritic stainless steels. Strengths of duplex stainless steels can in some cases be double that for austenitic stainless steels.
Whilst duplex stainless steels are considered resistant to stress corrosion cracking, they are not as resistant to this form of attack as ferritic stainless steels. However, the corrosion resistance of the least resistant duplex stainless steels is greater than that for the most commonly used grades of stainless steels, i.e. 304 and 316.
Type:
Elbow (180 Deg, 90 Deg. & 45 Deg. LR,SR,)
Tee (Equal &Reducingl)
Reducer (Concentric & Eccentric)
CAP,
Stubend (Long &Short)
Material:
Stainless Steel: ASTM A403 WP 304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/ 904L/ etc.
Carbon Steel: ASTM A234 WPB / A420 WPL3/ A420 WPL6/ MSS-SP-75 WPHY 42/46/52/56/60/65/70 etc.
Alloy Steel: ASTM A234 / WP5/ WP9/ WP11/ WP22/ WP91
SIZES:
1/2″ N. B. TO 24″ N. B. Seamless Pipe Fittings(BW)
1/2″ N. B. TO 72″ N. B. Welded BW
Marking:Standard/ As per request
Packing: Wooden case(Fumigation free) Or as per request
Inspection: In house and third party
Document: MTC EN10204-3.1 can be provided prior to shipment
