ASTM B150 UNS C63000 Nickel Aluminium Bronze Stud Bolt & Hex Nut,UNS C63000 Stud bolt
C63000 / AMS4640
ASTM B150 UNS C63000 / AMS4640 is one of the most commonly used American grades of nickel aluminium bronze. Containing around 10% aluminium, 5% nickel and 3% iron the alloy offers an inherent high strength and hardness combined with a very good toughness and an excellent resistance to wear, shock and abrasion.
The C63000 / AMS4640 also offers a very good corrosion, erosion and cavitation resistance in seawater and brackish water together with a good resistance to dilute sulphuric, hydrochloric and non-oxidising acids. It also has a very good galling resistance and also offers a high retention of mechanical properties at elevated temperatures.
C63000 Aluminium bronze offers excellent corrosion resistance and has been used in many applications.
Typically used in maring applications and corrosion environments. Our aluminium bronze studs include as follows: Material :C61900,C62300,C63000,C63280 C64200 Aluminium bronze alloy from ISO certificated source.
Manufacturing standards:DIN,IFI,BS,etc. free sample can be provided
Main specs:1/2″ – 2″ or M10 – M52.
Length is customized
Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
Abstract
This specification establishes the requirements for rods, bars, and shapes of aluminum bronze with Copper Alloy UNS Nos. C61300, C61400, C61900, C62300, C62400, C63000, C63020, C63200, C64200, and C64210. Products shall be produced in tempers HR50, M10, M20, M30, O20, O25, O30, O32, TQ30, TQ50 and TQ55. Products shall be tested and shall conform to dimensional (mass, diameter, length, thickness, straightness, and edge contour), mechanical (tensile and yield strength, Rockwell hardness, and elongation), and chemical composition requirements. Products should also meet requirements under mercurous nitrate test, ammonia test, and piston finish
UNS C63000 Stud bolt Chemical Requirements
| Composition, % Copper and Copper Base Alloys |
|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UNS Designation | Alloy | General Name | Aluminum | Copper, min | Iron, max | Manganese, max | Nickel, max | Phosphorus | Silicon | Zinc, maxA | Lead, max | Tin | Arsenic, max |
| C63000 | 630 | Aluminum Bronze | 9.0 – 11.0 | 78.0D | 2.0 – 4.0 | 1.50 | 4.0 – 5.5 | — | 0.25 max | — | — | 0.20 max | — |
A Elements shown as balance shall be arithmetically computed by deducting the sum of the other named elements from 100.
B Copper plus specified elements = 99.8 min; copper plus silver = 88.5-91.5.
C Cobalt is to be counted as nickel
D Minimum content of copper plus all other elements with specified limits shall be 99.5%.
E An alloy containing as high as 2.5% silicon is acceptable provided the sum of all the lements other than copper, silicon and iron does not exceed 0.30 %.
UNS C63000 Stud bolt Equivalent Specification
| CDA | ASTM | SAE | AMS | Federal | Military | Other |
|---|---|---|---|---|---|---|
| C63000 | B150 B150M |
J461 J463 |
4640 | QQ-C-465B AMD1 |
UNS C63000 Stud bolt Chemical Composition
| Cu%1 | Sn% | Zn% | Fe% | Ni% | Al% | Mn% | Si% | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|
Chemical Composition according to AMS 4640
1Cu value includes Ag.
Note: Cu + Sum of Named Elements, 99.5% min. Single values represent maximums.
|
|||||||||||
| Rem. | 0.20 | 0.30 | 2.00- 4.00 |
4.00- 5.50 |
9.00- 11.00 |
1.50 | 0.25 | ||||
Machinability
| Copper Alloy UNS No. | Machinability Rating | Density (lb/in3 at 68 °F) |
|---|---|---|
| C63000 | 30 | 0.274 |
HOW to order our ASTM B150 UNS C63000 Stud bolt?
BOLT, STUD ( FULLY THRD ) + 2 NUTS 5/8″ X 90 MM ASTM B150 UNS C63000 ASME B18.2.1/18.2.2
