ASTM B151 UNS C70600 WELD NECK FLANGE CuNi10Fe1.6Mn UNS 7060X FLANGES
We are the professional manufacturer of ASTM B151 UNS C70600 WELD NECK FLANGE CuNi10Fe1.6Mn UNS 7060X FLANGES in China.
UNS C70600 Flanges is made from a round bar of ASTM B151 UNS C70600 material,through forging and machining process.
ASTM B151 UNS C70600 Flange dimension can be made according to ASME B16.5 ,EEMUA 145 ,and DIN standard.
Flange Face can be Raise face （RF) and Flat Face(FF)
Cupronickel or copper–nickel (CuNi) is an alloy of copper with nickel, usually along with small quantities of other elements added for strength, such as iron and manganese. The copper content typically varies from 60 to 90 percent. (Monel is a nickel–copper alloy that contains a minimum of 52 percent nickel.)
CuNi10Fe1.6Mn 90-10 copper-nickel (C70600, CW352H), an alloy with 90% copper and 10% nickel, is the most commonly used alloy. It can be found in naval and commercial shipping, offshore oil and gas production as well as desalination and power generation. Alloys with 30% nickel content (C71500, C71640) and those which are more highly alloyed with aluminum, chromium or tin are used where greater resistance to seawater flow, sand abrasion, wear and galling, as well as higher mechanical properties, are required.
CHEMICAL COMPOSITION OF C70600 WELDNECK FLANGE
| Cu | Mn | Pb | Ni | Fe | Zn |
|---|---|---|---|---|---|
| 88.60 min | 1.00 max | 0.05 max | 9.00-11.00 | 1.80 max | 1.00 max |
MECHANICAL PROPERTIES OF C70600 WELDNECK FLANGE
| Tensile Strength, psi | Yield Strength (0.2% offset), psi | Elongation % min. |
|---|---|---|
| 50000 | 20000 | 30 |
EQUIVALENT GRADES OF C70600 WELDNECK FLANGE
| UNS | Werkstoff Nr. | Standard |
|---|---|---|
| C70600 | 2.0872 | Cu-Ni 90-10 |
This specification establishes the requirements for copper-nickel-zinc and copper-nickel rod and bar for general application produced from Copper Alloy UNS Nos. C70600, C70620, C71500, C71520, C74500, C75200, C75700, C76400, C77000, and C79200. The chemical composition, temper, annealed temper grain size, and tensile strength requirements are detailed.
Scope
1.1 This specification establishes the requirements for copper-nickel-zinc and copper-nickel rod and bar for general application produced from Copper Alloy UNS Nos. C70600, C70620, C71500, C71520, C74500, C75200, C75700, C76400, C77000, and C79200.
1.1.1 Copper Alloys UNS Nos. C70620 and C71520 are for product intended for welding applications.
Copper-nickel flanges are widely used in seawater piping systems, light-duty condenser tubes, seawater pipeline desalination plants and offshore platforms.
ASTM A151 Copper Nickel Threaded Flanges are durable and most importantly inexpensive. They are used in process equipment, hydraulic lines, automotive parts, underwater fencing, marine hardware components, feedwater heaters, pump components, heating cables and air conditioning equipment.
Specifications : ASTM B151 UNS C70600, CuNi10Fe1.6Mn, 7060X
Dimensions :DIN2633,DIN2632, EEMUA 145,EEMUA 234, ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, etc.
Standard : EEMUA Flanges, DIN Flanges, JIS Flanges, ANSI Flanges, ASME Flanges, BS Flanges, EN Flanges,
Size : 1/2″ to 24”
Class / Pressure : 150#, 300#, PN10, PN14, PN16,PN20 etc.
Flange Face Type : Flate Face (FF), Raised Face (RF),
How to order our C70600 CuNi 90/10 Weld Neck Flange?
6″ 150# ASTM B151 C70600 CuNi 90/10 FF Sch STD Weld Neck Flange
