ASTM B564 Inconel 625 Flange,UNS N06625 Flange,B564 N06625 Flange,Inconel 625 flanges
We are the ASTM B564 Inconel 625 Flange,UNS N06625 Flange ,ASME B564 N06625 Flange manufacturer.Inconel 625 weld neck flange,Inconel 625 Blind Flange,Inconel 625 slip on Flange,ASME B16.5
Alloy 625,inconel 625 flange,UNS N06625 Flange is a nickel-chromium-molybdenum alloy that is used for its high strength, high toughness and excellent corrosion resistance. The strength of alloy 625,UNS N06625 is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix. Although the alloy was developed for high temperature strength, its highly alloyed composition also provides a significant level of general corrosion resistance.
Industries and Applications
Alloy 625 Flange ,Inconel 625 Flange, UNS N06625 Flange is used in a variety of industries, including automotive, marine, aerospace, oil and gas, chemical processing and nuclear. Typical end use applications include heat exchangers, bellows, expansion joints, exhaust systems, fasteners, quick connect fittings and many other applications requiring strength and resistance against aggressive corrosive environments.
Inconel 625, Alloy 625 is a low carbon (0.03%) nickel-chromium-molybdenum-niobium alloy which has excellent corrosion resistance to a wide range of corrosive media. Alloy 625 is normally supplied in annealed condition for wet corrosion applications and is TÜV-approved for pressure vessels in the temperature range from -196°C to 450°C. In annealed condition (grade 1) Alloy 625 is characterized by:
– good mechanical property
– Resistance to chlorine-induced stress corrosion cracking
– high resistance to mineral acids such as nitric, phosphoric, sulfuric, and hydrochloric acid
– good resistance to alkalis and organic acids
– exceptional resistance to pitting, crevice, erosion and intergranular corrosion
ASTM B564 Standard Inconel 625
ASTM B 564 This specification covers forgings of nickel alloy UNS N02200, Ni-Cu alloy UNS N04400, Ni-Cr-Fe alloys UNS N06600, UNS N06603, and UNS N06690, Ni-Cr-Mo-Nb alloy UNS N06625 etc
INCONEL 625 FLANGES,Alloy 625,UNS N06625 EQUIVALENT GRADE
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Inconel 625 | 2.4856 | N06625 | NCF 625 | NA 21 | ХН75МБТЮ | NC22DNB4M | NiCr22Mo9Nb | ЭИ602 |
INCONEL 625 FLANGES CHEMICAL COMPOSITION
| Grade | C | Mn | Si | P | S | Ni | Cr | Fe | Mo | Co | Al | Ti | Nb + Ta |
| Inconel 625 | 0.10 max | 0.50 max | 0.50 max | 0.015 max | 0.015 max | 58.0 min | 20.0 – 23.0 | 5.0 max | 8.0 – 10.0 | 1.0 max | 0.40 max | 0.40 max | 3.15 – 4.15 |
ALLOY 625 flange ,inconel 625 FLANGES MECHANICAL PROPERTIES
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa –205 | 30 % |
We are the professional ASTM B564 UNS N06625 Inconel 625 Flange manufacturer,
Nickel alloy inconel 625 Flanges Types:
ASTM B 564 UNS N06625 inconel 625 Welding Neck Flange ASME B16.5 (WNF)
ASTM B 564 UNS N06625 Long Welding Neck Flange ASME B16.5(LWNF)
ASTM B 564 UNS N06625 inconel 625 Slip on Flange ASME B16.5 (SOF)
ASTM B 564 UNS N06625 Lap Joint Flange ASME B16.5 (LJW)
ASTM B 564 UNS N06625 inconel 625 Blind Flange ASME B16.5
ASTM B 564 UNS N06625 Socket Welding Flange ASME B16.5 (SWF)
ASTM B 564 UNS N06625 inconel 625 Threaded Flange ASME B16.5 (THW)
ASTM B 564 UNS N06625 Orifice Flange ASME B16.5
Dimensions : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges etc.
Standards : ANSI B16.5 inconel 625 Flange, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
Size : 1/8″ NB TO 48″NB.
Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
BS : BS4504 , BS4504, BS1560, BS10
Inconel 625 Flange Test Certificates: Manufacturer Test Certificate as per EN 10204 / 3.1
How to order our Inconel 625 Flanges,
