ASTM B564 Monel 400 Weld neck Flange,Alloy 400 Blind Flanges

We are a professional manufacturer of ASTM B564 Monel 400 Weld neck Flange,Alloy 400 Blind Flanges.

The ASTM B564 specification covers nickel alloy flanges, including those made from UNS N04400 (nickel 400), which is a solid solution-strengthened nickel alloy known for its excellent resistance to a wide range of corrosive environments, particularly in marine and chemical industries.

ASTM B 564  UNS N04400 Flange 

Monel 400 has a wonderful corrosion resistance by many reducing media such as sulfuric and hydrochloric acids. Generally, Monel 400 has a more resistantance to corrosion by oxidizing media than higher copper alloys. Monel 400 resists pitting and stress corrosion cracking in most fresh and industrial waters. It has good resistance in flowing seawater, but under stagnant conditions, pitting and crevice corrosion is induced. Monel 400 is probably the most resistant to hydrofluoric acid in all concentrations up to the boiling points.

Monel 400 UNS N04400 Chemical composition:

Alloy % Ni Cu Fe C Mn Si S
Monel 400

UNS N04400

Min. 63 28
Max. 34 2.5 0.3 2 0.5 0.024

Monel 400 UNS N04400 Physical properties:

Density 8.83 g/cm³
Melting point 1300-1390 ℃

Monel 400 UNS N04400 Alloy minimum mechanical properties in the room temperature:

Alloy state Tensile strength Rm N/mm² Yield strength
R P0. 2 N/mm²
Elongation
A 5 %
Monel 400 480 170 35

ASTM B 564 UNS N04400 Specifications

Pipe Smls Pipe Welded Tube Smls Sheet/Plate Bar Forging Fitting
B165 B725 B163 B127 B164 B564 B366

The ASTM B564 UNS N04400 Weld Neck Flange is typically made of Alloy 400 (nickel), which is known for its excellent resistance to a wide range of corrosive environments, especially in seawater, sulfuric acid, and other acidic media. These flanges are commonly used in industries such as chemical processing, marine, and power generation.

  • Material: Nickel (UNS N04400)
  • Standard: ASTM B564 (covers forged or rolled flanges, forged fittings, and valves in nickel alloys)
  • Flange Type: Weld Neck
  • Common Applications: Suitable for high-temperature and high-pressure environments, including seawater systems, chemical processing, and other industrial applications.

Other Flange type available 

Nickel alloy Flanges Types:
-Monel 400 UNS N04400 Welding Neck Flange(WNF)
-Monel 400 UNS N04400 Slip-on Flange(SOF)
-Monel 400 UNS N04400 Blind Flange
-Monel 400 UNS N04400 Plate Flange

ASTM B564 Monel 400 Weld neck Flange,Alloy 400 Blind Flanges

Applications of Monel 400 Flanges

  • Marine Engineering: Seawater piping, pump shafts, and offshore platform components.
  • Chemical Processing: Reactors, valves, and heat exchangers handling sulfuric acid, chlorides, and solvents.
  • Oil & Gas: Subsea equipment, refinery piping, and sour gas extraction systems.
  • Aerospace: Hydraulic systems and fuel processing components.
  • Power Generation: Heat recovery systems and nuclear reactor cooling circuit

Want to find a Monel 400 Weld neck Flanges manufactuer in China?

We provide certified Monel 400 Flanges tailored to your project needs. Request a quote or contact our experts for technical support