Hastelloy C276 Bar ASTM B574 N10276 Round Bar
We are the professional exporter and supplier of Hastelloy C276 Bar ASTM B574 N10276 Round Bar in China
UNS Number N10276 Hastelloy C276 is a nickel-molybdenum-chromium superalloy designed for outstanding corrosion resistance in a wide range of severe environments. This alloy is non magnetic, single phase and has good strength and ductility.
Excellent resistance to ferric and cupric chloride, mineral acids, chlorinated environments, formic and acetic acids, sea water and brine. Resistant to oxidation at temperatures up to 1040°C. It is widely used in chemical, petrochemical and oil industries.
- ABTN | ASTM | SAE | AISI: Alloy C276 | ASTM B574 | UNS N10276
- DIN | WNr: DIN 17744 | WNr 2.4819
- Chemical composition of UNS N10276
ASTM B574 Hastelloy C276 round bar Grade Specification
| STANDARD | WERKSTOFF NR. | UNS | JIS | EN | GOST | OR |
| Hastelloy C276 | 2.4819 | N10276 | NW 0276 | NiMo16Cr15W | ХН65МВУ | ЭП760 |
Chemical Composition UNS N10276 Hastelloy C276 round bar
| Grade | C | Mn | Si | Co | P | Fe | Mo | Ni | Cr | S | W | V |
| Hastelloy C276 | 0.010 max | 1 max | 0.08 max | 2.5 max | 0.04 max | 4 – 7 | 15 – 17 | Bal | 14.5-16.5 | 0.03 max | 3.0-4.5 | 0.35 max |
Mechanical Properties UNS N10276 Round bar
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.89 g/cm3 | 1370 °C (2500 °F) | Psi – 1,15,000 , MPa – 790 | Psi – 52000 , MPa – 355 | 40% |
Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten
This specification2covers rod of low-carbon nickelchromium-molybdenum alloys (UNS N10276, N06022, N06035, N06455, N06058, and N06059)*, low-carbon nickelmolybdenum-chromium-tantalum (UNS N06210), low-carbon nickel-chromium-molybdenum-copper alloy (UNS N06200), and low-carbon nickel-chromium-molybdenum-tungsten (UNS N06686) as shown in Table 1, for use in general corrosive service.The following products are covered under this specification: Rods 5⁄16 to 3⁄4 in. (7.94 to 19.05 mm), exclusive, in diameter, hot or cold finished, solution annealed and pickled, or mechanically descaled.Rods 3⁄4 to 31⁄2 in. (19.05 to 88.9 mm), inclusive, in diameter, hot or cold finished, solution annealed, ground or turned. Rods 1⁄4 to 3 1⁄2 in. (6.35 to 88.9 mm), inclusive, in diameter, solution annealed, cold finished, as cold finished, ground or turned (N06059 and N06686 only, see Table 2 and Table 3).
China Hastelloy C276 Round bar Material Specification:
ASTM B574/ ASME SB574 Inco C276 Round Bar
Grade: Hastelloy, Hastelloy B2 (UNS N10665), Hastelloy X, Hastelloy C-4 (UNS No. N06455), Hastelloy C-276 (UNS No. N10276), Hastelloy C 22 (UNS No. N06022), Hastelloy C 2000, Hastelloy B-3 (UNS N10675)
Size Range: 15NB to 300NB
Length: 100 mm To 3000 mm Long & Above
Certificate:EN 10204 3.1
