BRIDAS DESLIZANTES Slip On Flange,ASTM A182 F316/316L SORF Flange,BridasDeslizable (Slip on)
We are the professional manufacturer and exporter of ASTM A182 F316/316L Slip on Flange,SORF Flange,stainless steel Flange in China.BRIDAS DESLIZANTES Slip On Flange,ASTM A182 F316/316L SORF Flange,BridasDeslizable (Slip on)
SLIP ON FLANGES SPECIFICATION
Brida Flange acero inoxidable 304-316 de 1/2″” a 12″” , Presion 150/300 Lbs
SLIP ON,Conexión Brida Slip-on en acero inoxidable. También llamada, Brida deslizable o sin cuello permite que el exterior de el tubo se introduzca libremente en su interior.
• Tipo: T304 / T316
BRIDAS DESLIZANTES (SLIP-ON)
En este tipo de bridas, el tubo penetra en el cubo de la misma sin llegar al plano de la cara de contacto, al que se une por medio de cordones de soldadura interna y externamente. Puede considerarse de montaje más simple que la brida con cuello, debido a la menor precisión de longitud del tubo y a una mayor facilidad de alineación. Sus condiciones mecánicas a la resistencia y fatiga son en general buenas, pero algo inferiores a las bridas con cuello, cuya sustitución por la brida deslizante –cuando las condiciones de trabajo son menos exigentes- se justifica por el menor costo de ésta.
Dimensions : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges etc.
Standards : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard PN6,PN10, PN16, PN25, PN40 Etc.
Size : 1/8″ NB TO 60″NB.
Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
BS : BS4504 , BS4504, BS1560, BS10
Astm A182 F316/F316L Stainless steel Flange specification
Stainless Steel Flanges, SS Flanges,
Standard: ASTM/ASME A/SA 182,
Grade: F304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L, Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
ASTM A182 F 316L Stainless Steel Flanges Dimensional Range & Standard Specification
| ASTM | A 182 |
| ASME | SA 182 |
Test Certificates: Manufacturer Test Certificate as per EN 10204 / 3.1
A182 F316 /F316L composition & Mechanical Properties
A182 f316/316L is the most commonly used austenitic stainless steel in the chemical process industry. The addition of molybdenum increases general corrosion resistance, improves chloride pitting resistance and strengthens the alloy in high temperature service. Through the controlled addition of nitrogen it is common for 316/316L to meet the mechanical properties of 316 straight grade, while maintaining a low carbon content.
A182 F316 /F316L composition Chemistry
| Ni | Cr | Mo | Mn | Si | C | S | P | N | Fe | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIN | 10.0 | 16.0 | 2.0 | – | – | – | – | – | – | – |
| MAX | 14.0 | 18.0 | 3.0 | 2.0 | 0.75 | 0.03 | 0.03 | 0.045 | 0.1 | Balance |
Physical Properties
Density: 0.285 lb/inch3
Poisson’s Ratio: 0.3
Electrical Resistivity: 445 Ohm-circ mil/ft
| Temperature, °F | 70 | 212 | 932 | 1832 |
| Coefficient* of Thermal Expansion, in/in°F x 10-6 | – | 9.2 | 10.1 | 10.8 |
| Thermal Conductivity Btu • ft/ft2 • hr • °F | 7.8 | – | – | – |
| Modulus of Elasticity Dynamic, psi x 106 | 29 | – | – | – |
Mechanical Properties
Representative Tensile Properties
| Ultimate Tensile Strength, ksi | 75 |
| 0.2% Yield Strength, ksi | 30 |
| Elongation, % | 40 |
| Hardness MAX, Brinell | 217 |
Typical Tensile and Impact Properties
| Temperature, °F | 70 | 200 | 400 | 600 | 800 | 1000 | 1200 | 1400 |
| Ultimate Tensile Strength, ksi | 82.4 | 75.6 | 71.1 | 71.1 | 71.1 | 68.4 | 50.7 | 30.7 |
| 0.2 % Yield Strength, ksi | 42.4 | – | – | – | 26.5 | 23.4 | 22.6 | – |
| Charpy Impact V-notch, ft-lbs | 65 – 100 | – | – | – | – | – | – |
Please send inquiry to bill@cnpipefitting.com
