Forged pipe Fittings

Forged steel pipe fittings are made in forging process,by heating a  piece of  steel that is placed between an upper and lower die, which molds the heated piece of  steel into the desired shape. After the forging process, the molded carbon steel is put through a machining process, where it is finished to meet all required specifications.

The material could be carbon steel,low temperature steel,Stainless steel,Alloy steel

Range: Forged Fittings 15 NB To 100 NB In 3000 LBS, 6000 LBS, 9000 LBS Available With NACE MR 01-75 in Stainless Steel, Duplex Steel, Monel, Inconel, Hastelloy, Titanium, Nickel Alloy, Etc
Outlet’s ¼” to 24″ in 3000 LBS, 6000 LBS, 9000 LBS available with NACE MR 01-75.

Forged Fittings :¼” NB to 4″ NB in 3000 LBS, 6000 LBS, 9000 LBS available with NACE MR 01-75.

Outlet’s :¼” to 24″ in 3000 LBS, 6000 LBS, 9000 LBS

Type :Socket Weld (S/W) & Threaded / Screwed (SCRD)

Standard available:

ASME B16.11

BS EN 10241 European Standard EN 10241 specifies requirements for screw threaded fittings of nominal sizes from DN 6 to DN 150 inclusive, made out of welded steel or seamless steel tubes, forging and rolled bars. It is applicable to those screw threaded steel pipe fittings that are used in the transportation and distribution of liquid or gas

EN ISO 6708 , Pipework components – Definition and selection of DN (nominal size) (ISO 6708:1995).

ISO 7-1: Pipe Threads where Pressure-Tight Joints are made on the Threads; Part 1: Dimensions, Tolerances and Designation.

ISO 7-2: Pipe Threads where Pressure-Tight Joints are made on the Threads; Part 2: Verification by means of Limit Gauges.

ISO 228-1: Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation.

ISO 228-2: Pipe threads where pressure-tight joints are not made on the threads – Part 2: Verification by means of limit gauges .

Thread Type:NPT,BSPT etc

Form :Elbow 45 deg & 90 degree, Tee , Union, Full & Half coupling, Cross, Cap, Swage Nipple, Plug, Bush

branch Outlet:Weldolet, Sockolet, Elbowlet, Thredolet, Nipolet, Letrolet, Swepolet

Standard :ASTM / ASME A/SA 182,ASME B16.11,EN10241