DIN 933 Hex Bolt,Hexagon Bolts ASTM A193 B7, A320 L7, A193 B16 hex bolt
DIN 933 full thread hex bolts/ DIN ISO 4017
Hexagon head bolts with thread to the head
Size: M12-M130
Materials: Heat resistant- 1.1181, 1.7218, 1.7225, 1,7709, 1.4923 Tough at subzero temperature – 1.7218, 1.5680, 1.7225 Corrosionfree- 1.4301, 1.4541, 1.4571 (up to M30)
A193 B16 Hex bolt, A320 L7 Hex bolts
Gr 8.8 DIN 933 hex bolt,Gr. 10.9 DIN 933 hex bolt,DIN 12.9 din 933 hex bolts
DIN 933 A2 Hex bolt,DIN 933 A4 hex bolts.DIN 933 ss316 hex bolt
DIN 933 – Hexagon head bolts with thread up to head
Current norm: DIN EN 24017
Equivalent norms: ISO 4017; CSN 021103; PN 82105; UNI 5739; EU 24017;
Table according to DIN 933, ISO 4017![din 933 HEX BOLT](https://i0.wp.com/cnkpipefitting.com/wp-content/uploads/2020/05/din-933-HEX-BOLT.jpg?resize=750%2C836&ssl=1)
DIN (Deutsches Institut für Normung – German Institute for Standardization) standards are issued for a variety of components including industrial fasteners as Metric DIN 933 Hexagon Head Cap Screws / Bolts. The DIN standards remain common in Germany, Europe and globally even though the transition to ISO standards is taking place. DIN standards continue to be used for parts which do not have ISO equivalents or for which there is no need for standardization. IN this case the ISO equivalent for DIN 933 is ISO 4017.
1) Mechanical properties of stainless steel for metric DIN 933 Hexagon Head Cap Screws / Bolts Full Thread
Stainless steels can be divided into three groups of steel – austenitic, ferritic and martensitic. Austenitic steel is by far the most common type (>90% of commercial fasteners). The steel groups and strength classes are designated by a four-digit sequence of letters and numbers (eg A2-70) as shown in the following table. DIN EN ISO 3506 governs screws and nuts made from stainless steel.
1) Chemical composition of stainless steel metric DIN 933 Hexagon Head Cap Screws / Bolts Full Thread
Chemical composition of steel metric DIN 933 Hexagon Head Cap Screws / Bolts Full Thread
PROPERTY |
MATERIAL AND TREATMENT |
CHEMICAL COMPOSITION LIMITS %
C P S |
TEMPERING TEMP ºC MIN. |
||||
CLAS S |
min. |
max. |
max. |
max. |
|||
4.6, 4.8, 5.8, 6.8 | Low or medium carbon steel | – | 0.55 | 0.05 | 0.06 | – | |
8.8 | Medium carbon steel quenched, tempered | 0.25 | 0.55 | 0.04 | 0.05 | 425 | |
9.8 | Medium carbon steel quenched, tempered | 0.25 | 0.55 | 0.04 | 0.05 | 425 | |
10.9 |
Medium carbon steel additives e.g. boron, Mn, Cr or Alloy steel – quenched, tempered |
0.20 |
0.55 |
0.04 |
0.05 |
425 |
|
12.9 | Alloy steel – quenched, tempered | 0.20 | 0.50 | 0.035 | 0.035 | 380 |