EN 10216-2 10CRMO9-10 SEAMLESS STEEL TUBES,EN 10216-2 10CRMO9-10 Pipes
1.standard:EN10216-2
2.material:10CRMO9-10
3.OD:10.2-711mm,WT:1.6-100mm.
4.High Technical method:Normalizing, Quenching and Tempering, Normalizing and Tempering.
5.Application: used in the power plant boiler tubes,etc
| Product | 10CrMo9-10 11CrMo9-10 25CrMo4 20CrMoV13-5-5 seamless steel pipe EN 10216-2 |
| Standard | EN 10216-2 |
| Material | 10CrMo9-10 11CrMo9-10 25CrMo4 20CrMoV13-5-5 |
EN 10216-2 Seamless steel tubes for pressure purposes Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
Chemical Composition of EN 10216-2 10CrMo9-10 tubes
| C % | Mn % | P % | S % | Si % | Cr % | Mo % |
| 0.08-0.14 | 0.30-0.70 | 0.025 max | 0.020 max | 0.50 max | 2.00-2.50 | 0.90-1.10 |
Mechanical Properties of EN 10216-2 10CrMo9-10 Pipes
| Tensile Strength, Mpa | Yield Strength, MPa | Elongation, % |
| 480-630 | 280 min | 22 min |
EN10216-2 10CrMo9-10 seamless steel tubes for pressure purposes Application
EN10216-2 10CrMo9-10 seamless steel tubes are widely used in hydraulic prop, high-pressure gas cylinder, high pressure boiler, chemical fertilizer equipment, oil cracking, automobile semi axle sleeve, diesel engine, hydraulic pipe fittings
EN10216-2 10CrMo9-10 seamless steel tubes for pressure purposes
Equivalent grade
10CrMo9-10 Chrome Moly Steel, EN 1.7380 (10CrMo9-10) Chromium-Molybdenum Steel, EN 10216-2 10CrMo9-10 Seamless Alloy Steel Tube/pipe, 10CrMo9-10 / 1.7380 Alloy special steel, EN10216-2 Seamless Steel Tubes For Pressure Equipment, En10216-2 10crmo9-10
Additional Condition
UT(Ultrasonic examination), AR(As Hot Rolled only), TMCP(Thermal Mechanical Control Processing), N(Normalized), Q+T(Quenched and Tempered),Z Direction Test(Z15,Z25,Z35), Charpy V-Notch Impact Test, The Third Party Test (such as SGS Test), Coated or Shot Blasting and Painting.
