EN 1092-1 TYPE 05 BLIND FLANGE,EN 1092-1 TYPE 05/A P265GH FLANGE,1.4404 Flanges
We are a professional manufacturer of steel forged flange in China,Blind flange,Blind raise face flange EN 1092-1 TYPE 05/A blind Flange,DIN 2527 Blind Flanges,JIS B2220 Blind Flanges
The blind flanges or blank are Flanges used for terminating of piping in many different industries.
The blind flanges PN16 by DIN EN1092-1, type 05 are flange fitting that is used to close the end of pipes, valves, or equipment nozzles. A blind flange is a round plate that has boltholes but no center hole, and because of this feature, this flange is used to close off the ends of piping systems and pressure vessel openings.
Our EN1092-1 type 05 blind flange are available in Carbon ,stainless and alloy steels.
stainless steel :A 182 F 304/304L/316/316L/321/347, Duplex F51/F53/F44/F55/F60/F61
Alloy steel :STM A694/ A694M F42/F46/F52/F56/F60/F70,A182 F5,F9,F11,F22
Carbon steel:ASTM A 105, P235GH,P250GH,P265GH,ST37.2 A 350 LF1, LF2, LF3,API 6A AISI 4130
EN 1092-1 FLANGE STANDARD
European standardEN 1092-1– concerning flanges for pipes – establishes the requirements for steel flanges based on theirnominal pressure (PN) and dimension (DN).
Moreover, it defines the different kinds of flanges and their sealing surfaces, tolerances, threading and labelling.
The DIN EN 1092-1 standard covers nominal sizes DN 10 (NPS 3/8″) to DN 4000 (NPS 160″) with pressure designations PN 2.5 to PN 400. These flanges are generally stocked in sizes DN 25 (NPS 1″) to DN 300 (NPS 12″) with a pressure designation of PN 16 in pipe bore and tube bore slip-on, along with blind flanges.
flat (A) blind flanges (TYPE 05).EN 1092-1 TYPE 05A blind flanges are used combined with flat welding flanges, raised face flanges or collar as end caps for tubes.
EN 1092-1 type 05 blind fange
Our production scope:
ASTM/ASME/ANSIB16.5, B16.47, ASME/ANSIB16.48 flange,EN 1092-1
| DIN flanges | EN flanges | ASME flanges | JIS flanges |
| German National Standards Institute | European Standards | America Society of Mechanical Engineers | Japanese Industrial Standard |
| DIN 2527 | DIN EN 1092-1 2007 | ANSI B 16.5 | JIS B2220 |
EN 1092-1 TYPE 05 PN 6 BLIND FLANGE
EN 1092-1 TYPE 05 PN 10 BLIND FLANGE
EN 1092-1 TYPE 05 PN 16 BLIND FLANGE
EN 1092-1 TYPE 05 PN 25 BLIND FLANGE
Size 1/2″-120″ (DN15-DN3000)
Pressure: Class150-Class2500
Facing RF/FF / RTJ
Standard: ASTM/ASME/ANSIB16.5, ASME/ANSI B16.3 and B16.47, ASME/ANSIB16.42, JIS/KS (5K, 10K, 16K, 20K), DIN2633, DIN2634, DIN2635,EN1092,BS4504,AWWA C206,API 6A ,Customized drawings welcomed
stainless steel :A 182 F 304/304L/316/316L/321/347, Duplex F51/F53/F44/F55/F60/F61
Alloy steel :STM A694/ A694M F42/F46/F52/F56/F60/F70,A182 F5,F9,F11,F22
Carbon steel:ASTM A 105, ST37.2 A 350 LF1, LF2, LF3,API 6A AISI 4130
Inspection: In house and third party
Document: MTC Comply with EN10204 3.1 can be provided prior to shipment
| Material | stainless steel :A 182 F 304/304L/316/316L/321/347,
Duplex F51/F53/F44/F55/F60/F61 Alloy steel :STM A694/ A694M F42/F46/F52/F56/F60/F70,A182 F5,F9,F11 Carbon steel:ASTM A 105, ST37.2 A 350 LF1, LF2, LF3,API 6A AISI 4130 |
|||||||
| Standard | ASTM/ASME/ANSIB16.5, B16.47, ASME/ANSIB16.48, JIS/KS (5K, 10K, 16K, 20K), DIN2633, DIN2634, DIN2635,EN1092,BS4504,AWWA C206,API 6A ,Customized drawings welcomed | |||||||
| Size | 1/2″ – 120 ” (DN15-DN3000) | |||||||
| Pressure | Class150-Class2500 JIS 5k-30k DIN 6bar-40bar | |||||||
| Type | slip on flange, Weld Neck Flange Threaded Flange Blind Flange, Orifice Flange socket weld flange, Spacer Ring, Paddle, Spectacle Blind Flange | |||||||
| Surface Treatment | Surface galvanized, antirust coating, Epoxy & FBE Coating,protected with plastic caps | |||||||
| Packing | Pallet/Wooden case(Fumigation free) | |||||||
| Certificate | ISO9001,EN10204 3.1 MTC | |||||||
| Quality control | In house and third party | |||||||
How to order our EN 1092-1 TYPE 05A blind flanges?
DN15 PN10-40 R/F BLIND FLANGE 316L EN1092-1 type 05
