UNS N05500 Stud bolt, Monel K500 stud Bolts, hex bolt,Moenl K500 hex nuts
ASTM F468 UNS N05500 also knowns as Monel K500 stud Bolts, hex bolt, It covers both coarse and fine threaded Monel K500 Bolts, screws, stud bolts. Below is the chemical, mechanical and other requirements. ASTM F468 UNS N05500 Fasteners carry EN 10204 Type 3.1 Certification.
The Monel K500 has the same corrosion resistance as the Monel 400, but with higher mechanical strength and hardness. Has good heat corrosion resistance and long-term tissue stability. Mainly used in the manufacture of aircraft engine operating temperature below 750 ℃ turbine blades and gas turbine blades; used in the manufacture of ships on the fasteners, springs; chemical equipment on the pump, valve parts; paper equipment, scraping blade Wait.
Monel K500 Fasteners Specification
Length
3 mm to 200 mm
Bolt / Screw Size
M3 – M56 | 3/6″ to 2″ | Custom Sizes
Nuts Size
M02 to M33 | Custom Sizes
ASTM F468 UNS N05500,Monel K500 stud bolt Chemical Requirement
Monel K500 Chemical composition:
| Alloy | % | Ni | Cu | Al | Ti | Fe | Mn | S | C | Si |
| Monle K500 | Min. | 63 | 27.0 | 2.30 | 0.35 | |||||
| Max. | 33.0 | 3.15 | 0.85 | 2.0 | 1.5 | 0.01 | 0.25 | 0.5 |
Monel K500 Physical properties:
| Density | 8.44 g/cm3 |
| Melting point | 1315-1350℃ |
Monel K500 minimum mechanical properties in the room temperature:
| Status | Tensile strength Rm N/mm2 |
Yield strength RP0.2N/mm2 | Elongation A5 % |
| Monel K500 | 1100 | 790 | 20 |
Packing Information:
1.Carton Size: 25*16*25CM
2.Wooden Pallet/Case Size: 110*90*80CM
3.Color Printed Box&Cartons can be made per customers’ desire.
