UNS N07718 Hex nuts,INCONEL 718 hex nuts,Inconel 718 stud bolt with nuts
Inconel 718 hex bolt
INCONEL® alloy 718 (UNS N07718/W.Nr. 2.4668) is a high-strength, corrosion-
inconel alloy 718 hex bolt has a good overall performance in the temperature range of -253 ~ 700 ℃. The yield strength below 650 ℃ ranks first in the deformed superalloy and has good resistance to fatigue, radiation, oxidation and corrosion as well as good Processing performance, good welding performance. Can produce a variety of complex shapes of parts and components, in the aerospace, nuclear energy, petroleum industry and extrusion die, in the above temperature range has been very widely used.
Inconel 718 hex nuts
Inconel 718 nut is a type of fastener with a thread hole. Nuts are almost always used opposite a mating Inconel 718 bolt to fasten a stack of parts together. The two partners are kept together by a combination of their threads’ friction, a slight stretch of the bolt, and compression of the parts.
Inconel 718 / UNS N07718 nuts /DIN 2.4668 nuts/GH4169 nut
Description:
Size: M6-M100(1/4-4 inch),H=D
Surface: Hexagonal, Hex heavy nut
Material: Inconel 718 / UNS N07718 /DIN 2.4668/GH4169
Applications:
As the high temperature strength at 700 ℃ and excellent corrosion resistance, ease of processing, inconel 718 can be widely used in a variety of high demand occasions.
Inconel 718 Chemical composition:
| Alloy | % | Ni | Cr | Fe | Mo | Nb | Co | C | Mn | Si | S | Cu | Al | Ti |
| inconel 718 | Min. | 50 | 17 | balance | 2.8 | 4.75 | 0.2 | 0.7 | ||||||
| Max. | 55 | 21 | 3.3 | 5.5 | 1 | 0.08 | 0.35 | 0.35 | 0.01 | 0.3 | 0.8 | 1.15 |
Inconel 718 Physical properties:
| Density | 8.2 g/cm³ |
| Melting point | 1260-1340 ℃ |
Inconel 718 Alloy mechanical properties in the room temperature:
| Alloy | Tensile strength Rm N/mm² |
Yield strength R P0. 2N/mm² |
Elongation A 5 % |
Brinell hardness HB |
| Solution treatment | 965 | 550 | 30 | ≤363 |
About Product :
| Main products | hex bolts, stud bolt,hex socket bolts, threaded studs, hex nuts and flat washers |
| Size Range | Diameter:M2—M64 Length:5mm—400mm(Customized is acceptable) Diameter:6#—2inch, Length:1/2inch—30inch(Customized is acceptable) |
| Standard | ANSI,UNI,DIN,BS,JIS,AS,GB,ISO,EN |
| Material | Super Alloy Stainless Steel |
| Grade | Duplex steel: 2205\2507\2304; Incoloy steel: 825\800\800H\901\925; Inconel steel: Inconel 600\inconel 601\Inconel 625\690\Inconel 718\X750; Monel steel: 400\K500; Hastelloy steel: B2\3, C4\22\276\2000, G3\30, X; Super Austenite steel: 904L,254smo, Alloy20\28\59\926, Al-6XN |
| Surface | self finish plain,minor polish, satin polish, black oxide,Electro Painting, |
| Others | Non-standard/standard/OEM/ODM/Customized service are provided. |
Nickel alloy Chemical Components:
| Hastelloy | C | Si | Mn | P | S | Ni | Cr | Mo | Fe | W | V | Co | Ti | Cu | Al |
| C4 | ≤0.009 | ≤0.05 | ≤1.0 | ≤0.02 | ≥0.01 | ≤58 | 14.5-17.5 | 14-17 | ≤3.0 | — | — | ≤2.0 | ≤0.7 | — | — |
| C22 | ≤0.015 | ≤0.08 | ≤0.5 | ≤0.02 | ≤0.02 | ≤50 | 20.0-22.5 | 12.5-14.5 | 2.0-6.0 | 2.5-3.5 | ≤0.35 | ≤2.5 | — | — | — |
| C276 | ≤0.01 | ≤0.08 | ≤1.0 | ≤0.03 | ≤0.04 | ≤51 | 14.5-16.5 | 15-17 | 4.0-7.0 | 3.0-4.5 | ≤0.35 | ≤2.5 | — | — | — |
| B2 | ≤0.01 | ≤0.08 | ≤1.0 | ≤0.02 | ≤0.01 | ≤64 | 0.4-0.7 | 26-30 | 1.6-2.0 | — | — | ≤1.0 | — | ≤0.5 | — |
| X | 0.05-0.15 | ≤1.0 | ≤1.0 | ≤0.015 | ≤0.01 | ≤40 | 20.5-23.5 | 8.0-10.0 | 17-20 | 0.2-1.0 | — | 0.5-2.5 | — | — | ≤0.1 |
| Inconel | C | Si | Mn | P | S | Ni | Cr | B | Fe | Cu | Ti | Al | Mo | Co | Nb |
| Inconel 600 | ≤0.15 | ≤0.5 | ≤1.0 | ≤0.015 | ≤0.015 | ≥72 | 14-17 | ≤0.006 | 6.0-10.0 | ≤0.05 | ≤0.3 | ≤0.3 | — | — | — |
| Inconel 601 | ≤0.1 | ≤0.5 | ≤1.5 | ≤0.02 | ≤0.015 | 58-63 | 21-25 | — | ≤7.2 | ≤1.0 | — | 1.0-1.7 | — | — | — |
| Inconel 625 | ≤0.1 | ≤0.5 | ≤0.5 | ≤0.015 | ≤0.015 | ≥65 | 20-23 | — | ≤5 | — | ≤0.4 | ≤0.4 | — | ≤1.0 | 3.15-4.15 |
| Inconel 690 | 0.023 | 0.07 | 0.23 | 0.006 | 0.002 | 59.89 | 30.39 | — | 8.88 | 0.02 | 0.26 | 0.22 | — | — | — |
| Inconel 718 | ≤0.08 | ≤0.35 | ≤0.35 | ≤0.01 | ≤0.01 | 50-55 | 17-21 | — | ≤11.14 | ≤0.3 | ≤1.15 | ≤0.8 | — | — | 4.75-5.5 |
| Inconel X750 | ≤0.08 | ≤0.5 | ≤1 | ≤0.015 | ≤0.01 | ≥69 | 14-17 | — | 5-9 | ≤0.5 | 2.25-2.75 | — | 0.4-1 | ≤1 | 0.7-1.2 |
| Incoloy | C | Si | Mn | P | S | Ni | Cr | Mo | Fe | B | Co | Ti | Cu | Al |
| incoloy 800 |
≤0.1 | ≤1 | ≤1.5 | ≤0.03 | ≤0.015 | 30-35 | 19-23 | — | ≥39 | — | — | — | — | — |
| incoloy 825 | ≤0.025 | ≤0.5 | ≤1 | — | — | 38-46 | 19.5-23.5 | 2.5-3.5 | ≥19.5 | — | ≤1 | 0.6-1.2 | 1.5-3.5 | ≤0.2 |
| incoloy 800H | 0.06-0.1 | ≤1 | ≤1.5 | ≤0.045 | ≤0.015 | 30-35 | 19-23 | — | ≤39.5 | — | — | 0.15-0.6 | ≤0.75 | 0.15-0.6 |
| incoloy 800HT | ≤0.025 | ≤0.5 | ≤1 | ≤0.0.2 | ≤0.01 | 38-46 | 19.5-23.5 | 2.5-3.5 | ≥20.8 | — | — | 0.6-1.2 | 1.5-3 | ≤0.2 |
| incoloy 901 | 0.02-0.06 | ≤0.4 | ≤0.5 | ≤0.02 | ≤0.008 | 40-45 | 11-14 | 5-6.5 | ≥29.89 | 0.01-0.02 | — | 2.8-3.1 | ≤0.2 | ≤0.3 |
| Monel | C | Si | Mn | S | Ni | Fe | Ti | Cu | Al |
| Monel400 | ≤0.3 | ≤0.5 | ≤2 | ≤0.024 | ≥63 | ≤2.5 | — | 28-34 | — |
| MonelK500 | ≤0.25 | ≤0.5 | ≤1.5 | ≤0.01 | ≥63 | ≤2 | 0.35-0.85 | 27-33 | 2.3-3.15 |
| Duplex | C | Si | Mn | P | S | Ni | Cr | Mo | N | Cu |
| 2205 | ≤0.03 | ≤1 | ≤2 | ≤0.03 | ≤0.02 | 4.5-6.5 | 21-23 | 2.9-3.5 | 0.14-0.2 | — |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 6-8 | 24-26 | 3-5 | 0.24-0.32 | ≤0.5 |
| 2304 | ≤0.03 | ≤1 | ≤2.5 | ≤0.04 | ≤0.03 | 3-5.5 | 21.5-24.5 | 0.05-0.6 | 0.05-0.2 | 0.05-0.6 |
| Super Austenite | C | Si | Mn | P | S | Ni | Cr | Mo | Fe | Cu |
| 904L | ≤0.02 | ≤1 | ≤2 | ≤0.045 | ≤0.035 | 23-28 | 19-23 | 4-5 | ≥38.9 | 1-2 |
| 254smo | ≤0.02 | ≤0.8 | ≤1 | ≤0.03 | ≤0.01 | 17.5-18.5 | 19.5-20.5 | 6-6.5 | — | 0.5-1 |
| AL-6XN | 24 | 21 | 6 | N:0.2 |
TestEquipments:
Packing Information:
1.Carton Size: 25*16*25CM
2.Wooden Pallet/Case Size: 110*90*80CM
3.Color Printed Box&Cartons can be made per customers’ desire.
ASTM Specifications for Bolt Fasteners
A193 – Alloy steel and stainless steel bolting materials for high temperature or high pressure service.
A307 – Carbon steel bolts and studs, 60,000 psi tensile strength.
A320 – Alloy steel and stainless steel bolting materials for low temperature service.
A325 – Structural bolts, steel, heat treated, 120/105 ksi minimum tensile strength.
A354 – Quenched and tempered alloy bolts, studs, and other externally threaded fasteners.
A449 – Quenched and tempered steel bolts and studs for general use.
A490 – Structural bolts, alloy steel, heat treated, 150 ksi minimum tensile strength.
F568 – Standard for metric bolts, screws and studs that are used in general engineering applications
F593 – Stainless steel bolts, hex cap screws, and studs.
F1554 – Anchor bolts designed to anchor structural supports to concrete foundations.
ASTM Specifications for Nut Fasteners
A194 – Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service
A563 – Standard Specification for Wrought Cobalt-20Nickel-20Chromium-3.5Molybdenum-3.5Tungsten-5Iron Alloy for Surgical Implant Applications
A594 – Standard Specification for Stainless Steel Nuts , Corrosive service applications
F467 – Standard Specification for Nonferrous Nuts for General Use , general use
ASTM Specifications for Washers
F436 – Specification for Hardened Steel Washers , carbon steel, steel, washers, weathering steel, Hardened steel washers
F844 – Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
F959 – Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
