FBE COATED LINED ASTM A671 CC60 EFW Pipe
FBE known as Fusion bonded epoxy coating, also known as fusion-bond epoxy powder coating and commonly referred to as FBE coating, is an epoxy-based powder coating that is widely used to protect steel pipe used in pipeline construction from corrosion
Our ASTM A671 CC60 EFW Pipe FBE coating and lining according to AWWA C213 ,which is the Standard Fusion-Bonded Epoxy Coatings and Linings for Steel Water Pipe and Fittings
Fusion bonded epoxy (FBE) coated steel pipes are used for prevent steel pipes from corrosion and harmful chemicals. These are thin coatings of epoxy-resin powder materials formed in a film and applied on pipes by specialised coating facilities by electrostatic spraying.
ASTM A671 CC60 EFW pipes is made from ASTM A516 Gr 60 steel plate.
CL22 requests stress-relieving heat treatment ,and X-ray exmination on the pipes
| ASTM A671 CC60 CL22 Pipes Outer Diameter Size | 16″ NB to 100″ NB (Nominal Bore Size) |
| ASTM A671 CC60 CL22 Pipes Wall Thickness | Schedule 20 to Schedule XXS (Heavier On Request) Up to 250 mm Thickness |
| ASTM A671 CC60 CL22 Pipes Length | 5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size. |
ASTM A671 is a standard specification for Electric-Fusion-Welded (EFW) steel pipe for atmospheric and lower temperatures
CC60: “CC60” is the grade designation within the ASTM A671 specification. In this case, “CC60” represents a carbon steel grade with a minimum yield strength same as ASTM A516 grade 60.
EFW.EFW stands for Electric-Fusion-Welded, which refers to the manufacturing process used to produce these pipes. EFW pipes are made by forming and welding flat steel plates into cylindrical shapes using electric fusion welding processes.
ASTM A671 CC60 EFW pipes are commonly used in various industries and applications where moderate strength and good weldability are required, and where the operating temperatures are relatively low. These pipes are suitable for use in atmospheric and lower temperature environments, such as water transmission, structural applications, and some process piping applications.
A516 Gr 60 steel plate is carbon steel for making pressure vessels, such as oil tanks. A516 Gr 60 composition consists of carbon, silicon, manganese, phosphorus, sulfur, aluminum, chromium, copper, nickel, molybdenum, niobium, titanium and vanadium.
ASTM A516 Gr 60 EFW PIPES composition:
| Grade | Max. C % for thickness t (mm) | Mn % for thickness t (mm) | Si % | P % max | S % max | ||||
| 6-12.5mm | 12.5-25mm | 25-50mm | >50mm | ≤12.5mm | >12.5mm | ||||
| A516 Gr 60 | 0.21 | 0.23 | 0.23 | 0.25 | 0.6-0.9 | 0.80-1.20 | 0.13-0.45 | 0.035 | 0.035 |
A516 Gr 60 steel plate is normally produced in the As Rolled condition for thickness 1-1/2” and under. Normalizing is required for thickness over 1-1/2”. A516 Gr 60 steel plate has good thermal conductivity and magnetic permeability. The applications of A516 Gr 60 steel plate include calorifiers, oilfield fabrications, valves, storage tanks and condensers, etc.
ASTM A516 GR.60 PRESSURE VESSEL PLATES MECHANICAL PROPERTIES
| Tensile strength (ksi) | Yield strength (ksi) | Elongation min, % 200 mm (8 in) | Elongation min, % 50 mm (2 in) |
| 485-620 (70-90) | 260 (38) | 17 | 21 |
28″ CS pipe, WT. 23.83 mm, LSAW, ASTM A671 GR CC60, External FBE coated, Internal FBE coated
We also can supply FBE Coating lining ASTM A671 CC70 EFW Pipe
