Inconel 600 early development of nickel – chromium – iron-based solid solution strengthened alloy,
Inconel 600 has good high temperature corrosion and oxidation resistance, excellent hot and cold processing and welding performance, in the following 700 ºC have a satisfactory heat resistance and a high plasticity. Alloys can be strengthened by cold working, can also be used for resistance welding, solvent welding or soldering connection, can supply cold-rolled sheet, hot-rolled plate, strip, wire, bar, pie, ring blanks, ring forgings, etc., Suitable bear a low load below 1100 ºC antioxidant components.
| Inconel 600 Chemical Composition | |||||||||||
| C | Cr | Ni+Co | Al | Ti | Fe | Nb+Ta | Mn | Si | P | S | Cu |
| ≤0.15 | 14.0~17.0 | ≥72 | ≤0.35 | ≤0.50 | 6.00~10.00 | ≤1.00 | ≤1.00 | ≤0.50 | ≤0.040 | ≤0.015 | ≤0.50 |
| Inconel 600 Mechanical Properties | ||||||
| θ/ºC | Tensile Properties | HBS | Bending test | |||
| σb/MPa | σP0.2/MPa | δ5/% | φ/% | |||
| 20 | ≥585 | ≥240 | ≥30 | – | 134~217 | – |
·Material: Inconel 600
·Certificate: ISO9001:2008, SGS
·Packaging Detail: 20-25kgs per carton, 36-48 cartons per pallet or according to customer’s requirement.
·Customer Service: 24-hours standby, Critical listening your every suggestion and feedback ASAP.
We can supply wide variety of exotic alloy fasteners. Our special materials are Hastelloy C-276, Hastelloy C-22, Hastelloy B3, Incoloy 825, Incoloy 925, Incoloy 926, Incoloy 800HT, Inconel 600, Inconel 625, Inconel X-750, Inconel 725, Inconel 718, Monel 400, Monel404, Monel K500, Duplex 2205, Super Duplex UNS32750, Super Austentic 904L, Super Austentic F44, Titanium, Nimonic 80A, GH113, GH3039, GH2032, Precipitation-hardening 17-4PH, Super Austentic 20Cb-3, Super Austentic 6XN, Austentic 347H etc. Our hot forged fastener size range is from M5-M100.
Our representatives will assist you in analyzing your requirements and selecting the system best suited to your needs. We inventory an extensive line of standard products and will economically produce special systems to meet your design requirements.
