JIS B2220 SUS304 SOFF Flange,JIS 5K SOFF FLANGE,JIS 10K SOP SUS304 Plate Flange
C&N is a professional manufacturer of steel forged flange in China,JIS B2220 SUS304 SOFF Flange,JIS 5K SOFF FLANGE,JIS 10K SOP SUS304 Plate Flange
Jis 10k Flanges is a Japanese standard specification for Flanges This standard for JIS B2220 Flanges ,JIS B2220 Flange is available in pressure grade 5K, 10K, 16K, 20K, 30K
SUS304 Stainless Steel Introduction
SUS304 material is a Japanese JIS standard and the most commonly used stainless steel, containing 18% Cr and 8% Ni. It can maintain good strength and heat resistance in high temperature and low temperature environments
JIS (Japan) & KS (Korean) Flanges are manufactured to the same specifications.
We supply an extensive range of Japanese JIS and/or Korean (KR) Flanges
SUS304 Stainless Steel Chemical Composition
The composition of SUS304 grade stainless steel is given in table 1.
Table-1, SUS304 stainless steel composition
| Chemical Composition % | |||||||||
| Country (Region) | Standard | Steel Grade | C ≤ | Si ≤ | Mn ≤ | P ≤ | S ≤ | Cr | Ni |
| Japan | JIS G4303 | SUS304 | 0.08 | 1.00 | 2.00 | 0.045 | 0.030 | 18.00-20.00 | 8.00-10.50 |
SUS 304 Mechanical Properties
The following table shows the SUS 304 yield strength, tensile strength, elongation and hardness.
Table-2, SUS 304 mechanical properties
| Mechanical properties | ||||||||
| Country (Region) | Standard | Steel Grade | Diameter (d) in mm | Yield strength (N/mm2) | Tensile strength (N/mm2) | Elongation (%) | Hardness (HB) | Hardness (HV) |
| Japan | JIS G4303 | SUS304 | d≤180 | ≥ 205 | ≥ 520 | 40 | ≤ 187 | ≤ 200 |
Materials: Carbon Steel JIS SS400,Stainless Steel etc…
Sizes: 3/8″ ~ 60″ (1mm ~ 1500mm)
Standard Flanges: JIS B2220 – 1984 (KSB 1503 – 1985)
we can supply JIS B2220 5K slip on plate flange(SOP Flange) in the nominal size 10A to 1500A,the materials can be carbon steel,stainless steel,alloy steel and so on.The raw materials as follows:
Carbon Steel: JIS SS400
Stainless Steel: ASTM A182 304,F304L,F316,F316L,F321,F321H,F304H,F316H,F347H,1.4301,1.4306,1.4401,1.4404,1.4541,1.4571,SUS304,SUS316 etc.
JIS-B2220 Pipe Flanges
1.Scope
This Standard specifies steel pipe flanges (hereafter referred to as “flanges”) of nominal size 10A to 1500A for nominal pressure 5K, 10K, 10K light type,16K, 20K and 30K which are used to join parts for piping, such as steel pipes and valves,
JIS B2220 SOP Flanges,means Slip on plate Flanges,it always has a flat face.
JIS B2220 5K Slip on Plate Flange(SOP Flange) Dimensions
JIS 10K SOP SOH BL Flange / JIS B 2220/Standards, Dimensions & Weight
| Nominal | Outside | Inside | Outside | Sectional Dimensions of Flange | Bolt Hole | Nor | Approx. | ||||||||||
| Dia. of | Dia. of | Dia. of | Dia. of | t | T | Dia. of Hub | r | Dia. of | Dia. of | Bolt. | Number | Hole | Bolt | Weight | |||
| Flange | Steel | Flange | Flange | a | b | Face | Raised Face | Circle | of Bolt | Dia. | Size | (kg) | |||||
| Pipe | do | D | f | g | Dia | Holes | h | SOP | BL | SOH | |||||||
| 10 | 17.3 | 17.8 | 90.0 | 12 | – | – | – | – | 1 | 46 | 65 | 4 | 15 | M12 | 0.51 | 0.53 | – |
| 15 | 21.7 | 22.2 | 95.0 | 12 | – | – | – | – | 1 | 51 | 70 | 4 | 15 | M12 | 0.56 | 0.60 | – |
| 20 | 27.2 | 27.7 | 100.0 | 14 | – | – | – | – | 1 | 56 | 75 | 4 | 15 | M12 | 0.72 | 0.79 | – |
| 25 | 34.0 | 34.5 | 125.0 | 14 | – | – | – | – | 1 | 67 | 90 | 4 | 19 | M16 | 1.12 | 1.22 | – |
| 32 | 42.7 | 43.2 | 135.0 | 16 | – | – | – | – | 2 | 76 | 100 | 4 | 19 | M16 | 1.47 | 1.66 | – |
| 40 | 48.6 | 49.1 | 140.0 | 16 | – | – | – | – | 2 | 81 | 105 | 4 | 19 | M16 | 1.55 | 1.79 | – |
| 50 | 60.5 | 61.1 | 155.0 | 16 | – | – | – | – | 2 | 96 | 120 | 4 | 19 | M16 | 1.86 | 2.23 | – |
| 65 | 76.3 | 77.1 | 175.0 | 18 | – | – | – | – | 2 | 116 | 140 | 4 | 19 | M16 | 2.58 | 3.24 | – |
| 80 | 89.1 | 90.0 | 185.0 | 18 | – | – | – | – | 2 | 126 | 150 | 8 | 19 | M16 | 2.58 | 3.48 | – |
| (90) | 101.6 | 102.6 | 195.0 | 18 | – | – | – | – | 2 | 136 | 160 | 8 | 19 | M16 | 2.73 | 3.90 | – |
| 100 | 114.3 | 115.4 | 210.0 | 18 | – | – | – | – | 2 | 151 | 175 | 8 | 19 | M16 | 3.10 | 4.57 | – |
| 125 | 139.6 | 141.2 | 250.0 | 20 | – | – | – | – | 2 | 182 | 210 | 8 | 23 | M20 | 4.73 | 7.18 | – |
| 150 | 165.2 | 166.6 | 280.0 | 22 | – | – | – | – | 2 | 212 | 240 | 8 | 23 | M20 | 6.30 | 10.10 | – |
| (175) | 190.7 | 192.1 | 305.0 | 22 | – | – | – | – | 2 | 237 | 265 | 12 | 23 | M20 | 6.75 | 11.80 | – |
| 200 | 216.3 | 218.0 | 330.0 | 22 | – | – | – | – | 2 | 262 | 290 | 12 | 23 | M20 | 7.46 | 8.00 | – |
| (225) | 241.8 | 243.7 | 350.0 | 22 | – | – | – | – | 2 | 282 | 310 | 12 | 23 | M20 | 7.70 | 15.80 | – |
| 250 | 267.4 | 269.5 | 400.0 | 24 | 36 | 288 | 292 | 6 | 2 | 324 | 355 | 12 | 25 | M22 | 11.80 | 22.60 | 12.70 |
| 300 | 318.5 | 321.0 | 445.0 | 24 | 38 | 340 | 346 | 6 | 3 | 368 | 400 | 16 | 25 | M22 | 12.60 | 27.80 | 13.80 |
| 350 | 355.6 | 358.1 | 490.0 | 26 | 42 | 380 | 386 | 6 | 3 | 413 | 445 | 16 | 25 | M22 | 16.30 | 36.90 | 18.20 |
| 400 | 406.4 | 409.0 | 560.0 | 28 | 44 | 436 | 442 | 6 | 3 | 475 | 510 | 16 | 27 | M24 | 23.20 | 52.10 | 25.80 |
| 450 | 457.2 | 460.0 | 620.0 | 30 | 48 | 496 | 502 | 6 | 3 | 530 | 565 | 20 | 27 | M24 | 29.30 | 68.40 | 33.40 |
| 500 | 508.0 | 511.0 | 675.0 | 30 | 48 | 548 | 554 | 6 | 3 | 585 | 620 | 20 | 27 | M24 | 33.30 | 81.60 | 38.00 |
| (550) | 558.8 | 562.0 | 745.0 | 32(34) | 52 | 604 | 610 | 6 | 3 | 640 | 680 | 20 | 27 | M30 | 42.90 | 105(112) | 49.40 |
| 600 | 609.6 | 613.0 | 795.0 | 32(36) | 52 | 656 | 662 | 6 | 3 | 690 | 730 | 24 | 33 | M30 | 45.40 | 120(134) | 52.60 |
| (650) | 660.4 | 664.0 | 845.0 | 34(38) | 56 | 706 | 712 | 6 | 3 | 740 | 780 | 24 | 33 | M30 | 51.80 | 144(161) | 60.20 |
| 700 | 711.2 | 715.0 | 905.0 | 34(40) | 58 | 762 | 770 | 6 | 3 | 800 | 840 | 24 | 33 | M30 | 59.00 | 176(196) | 70.20 |
| (750) | 762.0 | 766.0 | 970.0 | 36(44) | 62 | 816 | 824 | 6 | 3 | 855 | 900 | 24 | 33 | M30 | 72.80 | 214(248) | 86.50 |
| 800 | 812.8 | 817.0 | 1020.0 | 36(46) | 64 | 868 | 876 | 6 | 3 | 905 | 950 | 28 | 33 | M30 | 76.00 | 249(286) | 92.00 |
| (850) | 863.6 | 868.0 | 1070.0 | 36(48) | 66 | 920 | 928 | 6 | 3 | 955 | 1000 | 28 | 33 | M30 | 80.10 | (330) | 98.70 |
| 900 | 914.4 | 919.0 | 1120.0 | 38(50) | 70 | 971 | 979 | 6 | 3 | 1005 | 1050 | 28 | 33 | M30 | 88.90 | (377) | 110.00 |
| 1000 | 1016.0 | 1021.0 | 1235.0 | 40(56) | 74 | 1073 | 1081 | 6 | 3 | 1110 | 1160 | 28 | 39 | M36 | 109.00 | (512) | 133.00 |
| 1100 | 1117.6 | 1122.0 | 1345.0 | 42(62) | 95 | 1175 | 1185 | 8 | 3 | 1220 | 1270 | 28 | 39 | M36 | 131.00 | (675) | 175.00 |
| 1200 | 1219.2 | 1224.0 | 1465.0 | 44(66) | 101 | 1278 | 1290 | 8 | 3 | 1325 | 1380 | 32 | 39 | M36 | 163.00 | (854) | 215.00 |
| 1350 | 1371.6 | 1376.0 | 1630.0 | 48(74) | 110 | 1432 | 1450 | 8 | 3 | 1480 | 1540 | 36 | 45 | M42 | 204.00 | (1180) | 274.00 |
| 1500 | 1524.0 | 1529.0 | 1795.0 | 50(82) | 123 | 1585 | 1605 | 8 | 3 | 1635 | 1700 | 40 | 45 | M42 | 248.00 | (1590) | 340.00 |
1. Flanges of parenthesized norminal diameter had better not be used. 2. SOP 10A-1500A 3. SOH 250A-1500A 4. BL 10-1500
Our Flanges prodution scope
JIS B2220 FLANGE
Size ragne : 15A to 2000A
Design: SOP, BIND, SOH,
Puressure: 2K, 5K, 10K, 16K, 20K, 30K, 40K
Material: carbon steel SS400, stainless steel SUS304, SUS316,JIS SS400 SOP FLANGE
Inspection: In house and third party
Document: MTC Comply with EN10204 3.1 can be provided prior to shipment
How to order our JIS B2220 SUS 304 Flanges
JIS B2220 SUS304 SORF/SOFF Flange 3/8 Inch ,10A, 10K
1. Material: SUS304
2. Size: 3/8″ (DN10)
3. Standard: JIS B2220
4. Pressure: 10K (10kg/cm2)
