UNS N07718 Alloy 718 Fasteners – Stud Bolts, Hex Bolts & Hex Nuts
U07718 Alloy 718 fasteners are high-strength precipitation-hardened nickel alloy fasteners used in high-temperature, cryogenic and demanding industrial applications.
Common products include stud bolts, hex bolts, threaded studs, hex nuts and heavy hex nuts.
Alloy 718 is also commonly identified as INCONEL® Alloy 718, W.Nr. 2.4668 and GH4169. INCONEL® is a registered trademark of Special Metals.
N07718 Specification
| Item | Specification |
|---|---|
| Material | UNS N07718 / Alloy 718 |
| Werkstoff | 2.4668 |
| China Cross-Reference | GH4169 |
| Products | Stud Bolts / Hex Bolts / Hex Nuts |
| High-Temperature Bolting Standard | ASTM A1014/A1014M |
| Bolts / Studs | ASTM F2281 when specified |
| Raw Material | ASTM B637 where applicable |
| Threads | UNC / UNF / 8UN / Metric |
| Typical Range | M6–M100 / 1/4″–4″ |
| Inspection | PMI, tensile, hardness, dimensions, thread inspection, TPI as specified |
What Is Alloy 718?
Alloy 718 / UNS N07718 is a precipitation-hardened nickel-chromium-iron alloy containing niobium, molybdenum, titanium and aluminum.
It combines:
- very high tensile and yield strength;
- good fatigue and creep resistance;
- good oxidation and corrosion resistance;
- useful strength from cryogenic temperatures to elevated temperatures.
Its final mechanical properties depend strongly on solution treatment and precipitation aging.
Alloy 718 Chemical Composition
| Element | Composition |
|---|---|
| Ni | 50.0–55.0% |
| Cr | 17.0–21.0% |
| Nb + Ta | 4.75–5.50% |
| Mo | 2.80–3.30% |
| Ti | 0.65–1.15% |
| Al | 0.20–0.80% |
| C | ≤0.08% |
| Fe | Balance |
Actual chemistry should be verified from the Material Test Certificate.
ASTM Standards for Alloy 718 Fasteners
ASTM A1014/A1014M
ASTM A1014/A1014M is the key specification for UNS N07718 precipitation-hardening bolting for high-temperature service.
It includes requirements for heat treatment, mechanical properties, hardness and stress-rupture performance.
ASTM F2281
ASTM F2281 covers nickel-alloy:
- bolts;
- hex cap screws;
- studs.
It does not automatically cover hex nuts.
ASTM B637
ASTM B637 covers Alloy 718 bar, forgings and forging stock.
It may control the raw material used to manufacture fasteners but should not be treated as the finished fastener specification.
Inconel 718 Stud Bolts
Alloy 718 stud bolts are used where high preload, strength and temperature resistance are required.
Available configurations include:
- fully threaded studs;
- double-end studs;
- threaded rods;
- custom lengths.
Common threads include UNC, UNF, 8UN and metric.
Inconel 718 Hex Bolts & Nuts
Alloy 718 hex bolts and nuts are used in high-load bolting assemblies for aerospace, oil & gas, petrochemical, nuclear and high-temperature equipment.
The RFQ should separately specify:
material + product standard + size + thread + dimensions + heat-treatment condition
because the material grade alone does not define the finished fastener.
Temperature Performance
Alloy 718 is commonly used over a wide temperature range, approximately:
−253°C to +700°C
depending on application.
This should not be treated as a universal design temperature for every fastener. Allowable service temperature depends on heat treatment, load, design code, creep requirements and environment.
Alloy 718 vs Alloy 625
| Item | Alloy 718 | Alloy 625 |
|---|---|---|
| Strengthening | Precipitation hardened | Solid-solution strengthened |
| Mechanical Strength | Very high | High |
| High-load fasteners | Strong advantage | Application-dependent |
| Corrosion focus | Good | Generally stronger focus |
| Heat treatment sensitivity | High | Lower |
They are not direct substitutes.
Testing & Inspection
Depending on the specification, inspection may include:
- chemical analysis;
- tensile and yield testing;
- hardness;
- stress rupture;
- PMI;
- dimensional inspection;
- thread gauge inspection;
- marking and traceability;
- third-party inspection.
Applications
UNS N07718 Alloy 718 fasteners are widely used in:
- aerospace engines;
- gas turbines;
- oil & gas equipment;
- subsea systems;
- nuclear equipment;
- high-temperature valves;
- pressure equipment;
- cryogenic equipment.
How to Order
A complete RFQ should include:
Product + Size + Thread + Length + Material + Standard + Heat Treatment + Quantity + Inspection
Example:
STUD BOLT WITH 2 HEAVY HEX NUTS, 1″-8UN × 180 MM, UNS N07718 ALLOY 718, ASTM A1014/A1014M, QTY 50 SETS
FAQ
Is Inconel 718 the same as UNS N07718?
UNS N07718 is the generic material designation. INCONEL® Alloy 718 is the Special Metals trade name.
What standard applies to Alloy 718 stud bolts?
ASTM A1014/A1014M is one of the most directly relevant standards for N07718 high-temperature bolting.
Is ASTM B637 a bolt standard?
No. ASTM B637 primarily covers bar, forgings and forging stock used as raw material.
Does ASTM F2281 cover Alloy 718 nuts?
Its formal scope covers bolts, hex cap screws and studs, not nuts.
Related Products
UNS N06625 Alloy 625 Stud bolt
Nickel-chromium-molybdenum fasteners for highly corrosive industrial service.
UNS N07750 Alloy X-750 Fasteners
Precipitation-hardened nickel alloy fasteners for elevated-temperature applications.
UNS N08825 Alloy 825 Stud bolt
Nickel-iron-chromium-molybdenum-copper fasteners for corrosion-resistant service.
GH4169 Fasteners
Chinese high-temperature alloy fasteners corresponding to the N07718 alloy family.

N07718 Stud Bolt Hex nuts
UNS N07718 Alloy 718 Fastener Manufacturer & Exporter
We manufacture and supply UNS N07718 Alloy 718 stud bolts, hex bolts, threaded studs, hex nuts and heavy hex nuts for high-temperature and high-strength applications.
Custom sizes, threads, heat treatment, PMI, mechanical testing and third-party inspection can be supplied according to project requirements.
Send us your size, thread, length, quantity, material specification and inspection requirements for quotation.

Packing Information:
1.Carton Size: 25*16*25CM
2.Wooden Pallet/Case Size: 110*90*80CM
3.Color Printed Box&Cartons can be made per customers’ desire.
