ASTM/ASME B444 Inconel 625 Pipes.Alloy 625 Pipes,Inconel 625 tubes
We are the ASTM/ASME B444 Inconel 625 Pipes.Alloy 625 Pipes,Inconel 625 tubes supplier and exporter in China.
Alloy 625,UNS N06625 also called Inconel 625 is a nickel-chromium alloy used for its high strength, excellent fabricability and outstanding corrosion resistance. Service temperatures can range from cryogenic to 980°C (1800°F). Alloy 625,UNS N06625 strength is derived from the solid solution strengthening effect of molybdenium and niobium on its nickel-chromium matrix.
Thus precipitation-hardening treatments are not required. This combination of elements also is responsible for superior resistance to a wide range of corrosive environments of unusual severity as well as to high-temperature effects such as oxidation and carburization.
astm-b444- 18
Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
Product size
OD:6~219mm
Wall thickness:1.0~15mm
Standard :ASTM B444 UNS N06625
ASTM B444 Inconel 625 168.3mm*7.11mm seamless tube
ASME B444 Inconel 625 219mm*7.11mm seamless tube
ASTM B444 ASME SB444 Inconel 625 Nickel Alloy Seamless Tubing Tubes Pipes Inconel 625 Seamless Tubes Chemical composition
Alloy
|
%
|
Ni
|
Cr
|
Mo
|
Nb+N
|
Fe
|
Al
|
Ti
|
C
|
Mn
|
Si
|
Cu
|
P
|
S
|
Co
|
N06625
|
Min. |
58.0
|
20.0
|
8.0
|
3.15
|
||||||||||
Max.
|
23.0
|
10.0
|
4.15
|
5.0
|
0.40
|
0.40
|
0.10
|
0.50
|
0.50
|
0.5
|
0.015
|
0.015
|
1.0
|
ASTM B444 ASME SB444 Inconel 625 Nickel Alloy Seamless Tubing Tubes Pipes Inconel 625 Seamless Tubes Physical properties
Density / Specific Gravity
|
8.44 kg/m³
|
Melting point
|
1290-1350℃
|
Inconel 625 Alloy minimum mechanical properties in the room temperature
Alloy
|
Tensile strength
min ksi (Mpa) |
Yield strength
R P0. 2 min ksi (Mpa) |
Elongation in 50.8mm
|
Brinell hardness
HB |
N06625 Annealed
|
120 (827)
|
60 (414)
|
30
|
≤220
|
N06625 Solution Annealed
|
100 (690)
|
40 ( 276)
|
30
|
≤220
|
Inconel 625 Chemial Composition
Alloy 600 | Ni + Co | Cr | Fe | C | Mn | S | Si | Cu |
72.0 min | 14.0-17.0 | 6.0-10.0 | .15 max | 1.00 max | .015 max | .50 max | .50 max | |
Alloy 601 | Ni | Cr | Al | C | Mn | Si | Fe | |
61.5 | 22.5 | 1.4 | 0.05 | 0.3 | 0.2 | 14 | ||
Alloy 625 | Cr | Ni | Mo | Co + Nb | Ta | Al | Ti | C |
20.00-30.00 | Remainder | 8.0-10.0 | 1.0 max | 3.15-4.15 | .40 max | .40 max | .10 max | |
Fe | Mn | Si | P | S | ||||
5.0 max | .50 max | .50 max | .015 max | .015 max |
Inconel 625 Mechanical Properties
Inconel 600 | Inconel 601 | Inconel 625 | Inconel 718 | |
Density | 8.4 g/cm³ | 8.1g/cm³ | 8.4 g/cm³ | 8.2 g/cm³ |
Melting Range,℃ | 1370-1425 ℃ | 1320-1370℃ | 1290-1350℃ | 1260-1340 ℃ |
Elongation % | 30min. | 30 min. | 30 min. | 30 min. |
Tensile strength – Mpa | 550min. | 650min. | 760min. | 965min |
Yield strength – Mpa | 240min. | 300min. | 345min. | 550 min. |
Brinell hardness (HB) | ≤195 | ≤220 | ≤220 | ≤363 |
inquiry or order specification for our Astm B444 Uns N06625 Seamless Pipes
Astm B444 Inconel 625 Seamless Pipes
Material: Inconel 625 (UNS N06625)
Size: 4 Inch (DN100)
Wall thickness: SCH40,Single length:6000mm length