DIN 2576 PN10 Plate Flange,DIN 2576 Slip on Flange,DIN 2576 PN 10 Flanges

C&N is a  professional manufacturer of steel flange in China,slip on flange,slip on raise face flange, DIN 2576 PN 10 slip on Flange/EN 1092-1 type 01 slip on Flange

DIN 2576 is a German standard specifying flanges according to DIN (Deutsches Institut für Normung, meaning German Institute for Standardization) standards.

DIN 2576: This is the specific standard number for flat flanges with a raised face (RF), commonly known as DIN flanges. DIN 2576 specifies the dimensions, tolerances, materials, and technical requirements for these flanges.

Now DIN 2576 is replaced y EN 1092-1 Type 01

PN10: This indicates the pressure rating of the flange, PN10 means the flange is designed to withstand a pressure of 10 bar (approximately 145 psi) at ambient temperature.

DIN-2576, slip-on-welding plate flange, which pressure grade is 10bar/PN10, Size from DN10 to DN1000, in forged steel, Stainless Steel, Carbon steel etc..

 

DIN 2576 PN 10 Slip on Flange,DIN 2576 Plate flange

Slip on Flange is essentially a ring that is placed over the pipe end, with the flange face extending from the end of the pipe by enough distance to apply a weld bead on the inside diameter.

The connection with the pipe is done with 2 fillet welds, as well at the outside as also at the inside of the flange.

This space is necessary, to do not damage the flange face, during the welding process.

DIN 2576 PN 10 Flanges specification.

‧ Dimension Standard: DIN 2576
‧ Materials: Carbon Steel / Stainless Steel
ASTM A105
ASTM A182 ( F304, F304L, F316, F316L, F304H, F316H, F11 & F12 )
ASTM A350 LF1, LF2, LF3

DIN-2576-PN10-Plate-Flange-DIN2576-PN10-slip-on-flange

DIN Plate Flanges  DIN 2573 PN6 Flanges DIN 2576 PN10 Flanges DIN 2501 PN10 Flanges DIN 2501 PN16 Flanges DIN 2502 PN16 Flanges DIN 2503 PN25 Flanges DIN 2503 PN40 Flanges DIN 2543 PN16 Flanges

Our Flange production scope:

slip on flange,Plate flange, Weld Neck Flange Threaded Flange Blind Flange,

Flange type Specifications Size Range
DIN / EN
Blind Flanges
PN 6, PN10, PN16, PN25, PN 40 DIN 2527 DN: 10 – 500 mm
PN 64 DN: 10 – 400 mm
PN 100 DN: 10 – 350 mm
Flat Flanges for Soldering or Welding
PN6 DIN 2573 DN: 10 – 500 mm
PN10 DIN 2576 DN: 10 – 700 mm
Lapped Flanges and Plain Collars
PN6 DIN 2641 DN: 10 – 700 mm
PN10 DIN 2642 DN: 10 – 700 mm
PN25 DIN 2655 DN: 10 – 500 mm
PN40 DIN 2656 DN: 10 – 400 mm
Welding Neck Flange
PN250 DIN 2628 DN: 10 – 250 mm
PN320 DIN 2629 DN: 10 – 250 mm
PN1 / PN2.5 DIN 2630 DN: 10 – 4000 mm
PN6 DIN 2631 DN: 10 – 3000 mm
PN10 DIN 2632 DN: 10 – 2800 mm
PN16 DIN 2633 DN: 10 – 2000 mm
PN25 DIN 2634 DN:10 – 1000mm
PN40 DIN 2635 DN: 10 – 500 mm
PN64 DIN 2636 DN: 10 – 350 mm
PN100 DIN 2637 DN: 10 – 350 mm
PN160 DIN 2638 DN: 10 – 300 mm
Lapped Joint Short Stub End
PN10 DIN 2673 DN: 10 – 1200 mm
Threaded Flanges
PN10 / PN16 DIN 2566 DN:6 – 100mm

China DIN 2576 PN 10 Slip on flange,DIN 2576 PN 10 plate Flange material available:

Carbon steel : A105, A266 CL2/CL4
Plate material : A516 Gr60/70
Low Temp Carbon steel : A350, LF2, CL1, CL2, LF3
High Yield Carbon steel : A694, F52, F60, F65, F70
Stainless steel : A182, F304/L, F304H, F310, F316/L, F317/L, F321/H, F347/H, F44
Low alloy steel : A182 F1, F5, F9, F11 CL1/CL2/CL3, F12 CL1/CL2, F22 CL1/CL3, F23, F91, F92
Duplex stainless steel : A182 F51, F53, F60
Alloy steel : Alloy 20,inconel Alloy 625/825/800
Aluminum Alloy:DIN 2576 5083-0 Flange, DIN 2576 6061 T6 Flange
Cupro Nickle:Cu Ni 90/10 Cu Ni 70/30
Keywords: DIN 2576 PN10 PL S235JR, DN300, Smooth Surface.
Type:Plate Flange.
Material: S235JR.
Size: DN700
Pressure: PN10 (150 LB).
Standard: DIN 2576.
Surface: Smooth Surface.

Looking for a reliable manufacturer and supplier of  DIN 2576 PN10 Plate Flange,DIN 2576 Slip on Flange?
Pls just drop us a mail, you will be satisfied with our good quality,reasonable price and professioanl service.