ASTM A182 F316/316L Blind Flange ,stainless steel blind flange,ASTM A182 F316/316L Flange,stainless steel flanges,Weld neck flange,Slip on Flanges.
We can supply the A182 F316L Flange as per ASME /ANSI B16.5,A182 F316L Flange ASME B16.47 standard,A182 F316L Flange as per EN 1092-1 Standard. Flange type :Weld neck flange,blind flange,Slip on flange,threaded flanges.
We are a professional manufacturer of A182 F316L Flange,A182 F316L weld neck flange,A182 F316L Slip on Flange,A182 F316L blind Flange in China.
We are also supplying the Stainless steel Flange with MTC EN10204 3.1, 3.2 /Mill Test Certificate From DNV, LLOYDS, ABS,BV Class approved makers for shipbuilding and marine industry.
Dimensions : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges etc.
Standards : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Flange type:Weld neck flange,slip on flange,Blind Flange,Threaded Flange
Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
Size : 1/8″ NB TO 48″NB.
Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
BS : BS4504 , BS4504, BS1560, BS10
Astm A182 F316 Stainless steel Flange specification
A182 F316L is a equivalent grade of 1.4404 X2CrNiMo17-12-2
Stainless Steel ASTM A182 F316/316L Flanges, SS Flanges,
SS Grades: F 304 – F 304L – F 304H – F 310 – F 310S – F 316 – F 316L – F 317 – F 317L – F 321 – F 321H – F 347 – F 347H – F 410 – F 446 – F 904L – F 51
Standard: ASTM/ASME A/SA 182, ASTM/ASME A 240 SA240
Grade: F304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L, Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
ASTM A182 F 316L Stainless Steel Flanges Dimensional Range & Standard Specification
Specification:StandardsDesignation
| ASTM | A 182 |
| ASME | SA 182 |
ASTM A182 F 316L Stainless Steel Flanges Production Range
| Specification | ASTM A182 / A240 & ASME SA182 / SA240 |
| Grade | F 316L Blind Flanges,F316L Blind Flange,316 Blind Flange, 316L blind flange, 316H, 316LN |
| Standard | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
| Size | 1/8″ to 36″ |
| Dimensions | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Class / Pressure | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
Test Certificates: Manufacturer Test Certificate as per EN 10204 / 3.1B,
A182 F316 /F316L Flange composition & Mechanical Properties
A182 F316/316L is the most commonly used austenitic stainless steel in the chemical process industry. The addition of molybdenum increases general corrosion resistance, improves chloride pitting resistance and strengthens the alloy in high temperature service. Through the controlled addition of nitrogen it is common for 316/316L to meet the mechanical properties of 316 straight grade, while maintaining a low carbon content.
A182 F316 /F316L flange composition Chemistry
| Ni | Cr | Mo | Mn | Si | C | S | P | N | Fe | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIN | 10.0 | 16.0 | 2.0 | – | – | – | – | – | – | – |
| MAX | 14.0 | 18.0 | 3.0 | 2.0 | 0.75 | 0.03 | 0.03 | 0.045 | 0.1 | Balance |
Physical Properties
Density: 0.285 lb/inch3
Poisson’s Ratio: 0.3
Electrical Resistivity: 445 Ohm-circ mil/ft
| Temperature, °F | 70 | 212 | 932 | 1832 |
| Coefficient* of Thermal Expansion, in/in°F x 10-6 | – | 9.2 | 10.1 | 10.8 |
| Thermal Conductivity Btu • ft/ft2 • hr • °F | 7.8 | – | – | – |
| Modulus of Elasticity Dynamic, psi x 106 | 29 | – | – | – |
Mechanical Properties
Representative Tensile Properties
| Ultimate Tensile Strength, ksi | 75 |
| 0.2% Yield Strength, ksi | 30 |
| Elongation, % | 40 |
| Hardness MAX, Brinell | 217 |
Typical Tensile and Impact Properties
| Temperature, °F | 70 | 200 | 400 | 600 | 800 | 1000 | 1200 | 1400 |
| Ultimate Tensile Strength, ksi | 82.4 | 75.6 | 71.1 | 71.1 | 71.1 | 68.4 | 50.7 | 30.7 |
| 0.2 % Yield Strength, ksi | 42.4 | – | – | – | 26.5 | 23.4 | 22.6 | – |
| Charpy Impact V-notch, ft-lbs | 65 – 100 | – | – | – | – | – | – |
A182 F316 /F316L flange
Certified with NACE, PWHT, HIC, SSC, Magnetic Particle Test, Dye Penereteration Test etc.
How to order our Stainless steel A182 F316L Flanges?
Example#1,
ASTM A182 F316L Weld Neck Flange, RF,8IN, CL 900, SCH 80s.
ASTM A182 F316L Blind Flange, RF, 2 IN, CL 150, SCH 40s.
