Aluminum 5052 Flange,ASTM B247 5052 Weld neck Flanges,Slip on Flanges
We are a professional manufacturer of Aluminum 5052 Flange,ASTM B247 5052 Weld neck Flanges,Slip on Flanges,Blind Flanges
5052 is an aluminium–magnesium alloy, primarily alloyed with magnesium and chromium. 5052 is not a heat treatable aluminum alloy, but can be hardened through cold working.
Aluminium alloy 5052 contains nominally 2.5% magnesium & 0.25% chromium. It has good workability, medium static strength, high fatigue strength, good weldability, and very good corrosion resistance, especially in marine atmospheres. It also has the low density and excellent thermal conductivity common to all aluminium alloys.
Aluminum flange is a flange used to connect pipes and is made of aluminum. It has the characteristics of light weight, corrosion resistance, high temperature resistance, easy processing, etc., and is widely used in pipeline systems in shipbuilding, chemical, petroleum, natural gas, food and other industries.
Aluminum 5052 Flange is available in ASM B16.5 Standard,DIN Flanges EN1092-1 standard
Aluminum 5052 Flange type:Weld neck Flange,Slip on Flanges,Blind Flanges
Spec: BS EN 573-3:2009
Alloy Aluminum 5052 Composition
| Chemical Element | % Present |
|---|---|
| Manganese (Mn) | 0.0 – 0.10 |
| Iron (Fe) | 0.0 – 0.40 |
| Copper (Cu) | 0.0 – 0.10 |
| Magnesium (Mg) | 2.20 – 2.80 |
| Silicon (Si) | 0.0 – 0.25 |
| Zinc (Zn) | 0.0 – 0.10 |
| Chromium (Cr) | 0.15 – 0.35 |
| Others (Total) | 0.0 – 0.15 |
| Other (Each) | 0.0 – 0.05 |
| Aluminium (Al) | Balance |
ASTM B247-20
Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
This specification covers aluminum and aluminum-alloy die forgings, hand forgings, and rolled ring forgings and includes the following UNS alloy designations: A91100, A92014, A92018, A92025, A92219, A92618, A93003, A94032, A95083, A96061, A96066, A96151, A97049, A97050, A97075, A97076, and A97175. Tempers covered by this specification includes: H112, T4, T6, T61, T73, T74, T7352, T7452, T7454, T652, T852, and H111 as well as F and 01 types. The forgings may be manufactured by pressing, hammering, or rolling, at the option of the producer. Requirements for quality assurance, chemical analysis, tension and hardness tests, heat treatment, heat-treat response, and stress corrosion resistance and stress-corrosion cracking test are detailed. The forgings shall conform to the chemical composition requirements prescribed for aluminum, silicon, iron, copper, manganese, magnesium, chromium, nickel, zinc, zirconium, and titanium. Forgings having the specified thickness shall meet the requirements specified for the mechanical properties such as tensile strength, yield strength, elongation, and Brinell hardness.
How to order our Aluminum forged ASTM B247 5052 Weld neck Flanges?
