EN755 EN AW 6060 ALUMINIUM PIPE ELBOWS,6060 T6 Elbows
We supply the aluminum 6060 elbow according to DIN 2605 and B16.9 dimensions.
Standard : DIN 2605,ANSI B16.9
Material Standard : EN 755 EN AW 6060 T66
End : butt weld bevel ends
Aluminium alloy 6060 is a medium strength heat treatable alloy with a strength slightly lower than 6005A. It has very good corrosion resistance and very good weldability plus good cold formability especially in temper T4. It is commonly used alloy for very complex cross sections and has very good anodizing response.
6060 aluminium alloy is an alloy in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is much more closely related to the alloy 6063 than to 6061. The main difference between 6060 and 6063 is that 6063 has a slightly higher magnesium content. It can be formed by extrusion, forging or rolling, but as a wrought alloy it is not used in casting. It cannot be work hardened, but is commonly heat treated to produce tempers with a higher strength but lower ductility.
EN AW-6060 Is suitable for anodizing, and has a high corrosion resistance and good for anodizing. The alloy is suitable for welding.
Hot pressed pipe elbows made of aluminium according to DIN 2605.
6060 Aluminum Chemical composition
| ALLOY | SI | FE | CU | MN | MG | CR | ZN | TI | OTHERS | AL |
| 6060 | 0.3-0.6 | 0.1-0.3 | 0.1 | 0.1 | 0.35-0.6 | – | 0.1 | 0.15 | – | remainder |
Mechanical Properties
Tensile strength (MPa): ≥470
Conditional yield strength 0.2 (MPa): ≥420
Elongation δ5 (%): ≥6
Aluminum 6060 pipe fittings availablity:
Al Alloy 6060 Flanges,
Aluminum 6060 elbow,
Aluminum 6060 Tee,
Aluminum 6060 Reducer,
Feature:
1. High-strength heat-treatable alloy.
2. Good mechanical properties.
3. Good usability.
4. Easy to process and good wear resistance.
5. Good corrosion resistance and oxidation resistance.
Application:
It is widely used for trucks, tower buildings, ships, pipelines and other building applications that require strength, weldability and corrosion resistance.
