Aluminum alloy 6061 T6 Flanges,Slip on Flange,Weld neck flanges,socket weld flanges ASME B16.5,DIN 2576 PN 10 slip on Flange

We are a professional Aluminum alloy flanges manufacturer,Aluminum 6061 T6 slip on Flange，RAISED FACE, #150 slip on raise face flange, DIN 2576 PN 10 slip on Flange/EN 1092-1 type 01 slip on FF Flange

ASME B16.5 150 lbs 6061 T6 slip on Flange,

DIN EN1092-1 PN6 PN10,PN16 slip on flanges

DIN 2576 PN10 6061 T6 Flanges

DIN 2576 PN10 6061 T6 slip on FF Flanges

Standard size ：DN40，DN50，DN65，DN80，DN100，DN125，DN150，DN200，DN300

ALUMINUM 6061 T6 Flanges,6061 T6 aluminium alloy Flange

6061 is a precipitation-hardened aluminum alloy, containing magnesium and silicon as its major alloying elements. It has good mechanical properties, exhibits good weldability, and is very commonly extruded (second in popularity only to 6063). It is one of the most common alloys of aluminum for general-purpose use.

It is commonly available in pre-tempered grades such as 6061-O (annealed), tempered grades such as 6061-T6 (solutionized and artificially aged) and 6061-T651 (solutionized, stress-relieved stretched and artificially aged).

Component    Wt. % Al 95.8 – 98.6 Cr 0.04 – 0.35 Cu 0.15 – 0.4 Fe Max 0.7

Component    Wt. % Mg 0.8 – 1.2 Mn Max 0.15 Other, each Max 0.05 Other, total Max 0.15

Component    Wt. % Si 0.4 – 0.8 Ti Max 0.15 Zn Max 0.25

Oxygen Making Equipment
Air Separation Equipment
Deep Cooling Equipment
Chemical equipment
HEAT exchanger, cooler, carburetor, intercooler, etc. Other equipment

We also produce the Aluminum 6061 T6 Flanges according to below DIN Flanges

DIN Plate Flanges

• • DIN 2573 PN6 Flanges
  • DIN 2576 PN10 Flanges
  • DIN 2501 PN10 Flanges
  • DIN 2501 PN16 Flanges
  • DIN 2502 PN16 Flanges
  • DIN 2503 PN25 Flanges
  • DIN 2503 PN40 Flanges
  • DIN 2543 PN16 Flanges